Fashed wrong dgtks file on EVA phone

[Chaserxx]

[Chaserxx]

[Chaserxx]

To download EVA-AL10_M00A056_Factory_firmware_Global__Nonspecific_ Android_6.0_EMUI_4.1_testpoint.dgtks

You need to use one of DC-unlocker's programs and click on button "Enter support area". More information on how to access support area You can find in How to access Support Area page.

Thatīs what i did....

Whats wrong i canīt see the test point image?

Thanks for u help

[Valdemaras]

Restart software and try now, since you are not dongle user additional option had to be enabled on your user account.

[Chaserxx]

now it worked.Is there a sequence for closing curcuit?
I need to do this with the power button plus the volume minus button together?
Or do not need
How long do I keep the stitches closed?

thank you

[Valdemaras]

You just need to short-circuit the pin-point and connect phone to usb while it's short circuited.

[Chaserxx]

Worked!!!!

Com port opened yuppppppp


but I can't flash now, my 72 hour expired days ago

lol don't have more money to buy credit again

my god

[Valdemaras]

Worked!!!!

Com port opened yuppppppp


but I can't flash now, my 72 hour expired days ago

lol don't have more money to buy credit again

my god

Restart software and try now again.

[Chaserxx]

Restart software and try now again.

Worked Valdemaras.

Thank you very much, i will try to recover my phone now

Lets see

[Chaserxx]

Not worked i as wrong


With a pincushion, I pressed it to the indicated point as the picture with the usb cable disconnected from the pc and without pressing any button on the phone. In the windows manager there was no port detected, no device when I connected the usb cable while closing the short at the indicated point. So I did the procedure again with the power plus the volume knob less together and the manager recognized the device as "usb be" on unidentified devices. It simply does not install any drivers and the Dc Phoenix is not recognized as well. Am I doing something wrong, my friend?

[Chaserxx]

Recognized as "USB SER"

[Valdemaras]

Yes, doing wrong, need to hold pin short-circuited while connecting usb cable to pc. Make sure hisuite is installed on pc too before you do any of this.

[Chaserxx]

I made it. The hisuite is already installed. I just do not know how to make the shock in the pin .... I put one end of the tweezers in the circuit and the other end put where?

[Valdemaras]

I made it. The hisuite is already installed. I just do not know how to make the shock in the pin .... I put one end of the tweezers in the circuit and the other end put where?

You need to ground it, another end may go to usb connector you connect device for charging etc,.