Huawei Honor 8 FRD-AL00 - IMEI 0000000

[Marcin Jakubowski]

Hello ! Gentlemen, I have this problem. Well, my client bought Honor 8 FRD-AL00. Updated and unfortunately hard brick. The phone did not respond only to fastboot. I bought a 15 Euro top-up and I used Rom Factory with Method 2. (The first method did not work completely - it was too crowded). After flashing the phone, I updated the B175 with SD Uptade before SD. The phone got up and worked but there is IMEI. A strange situation because after connecting to dc-unlocker in fastboot mode IMEI is detected.

Here is the proof:

Found Phone: FRD
Model: Huawei phone in fastboot mode
IMEI: 86369 ***********
Firmware: FRD-C00B175

IMEI1: 863696 ********
MEID: A000006D4DD67F
FB LockState: UNLOCKED
USER LockState: LOCKED
unlocked
Battery state: 3174mv

Any ideas ? The phone is now working, everything works but there is no IMEI and it shows that there is some NCK simlock. I am asking for advice on what to do.

[Valdemaras]

Hello, if it shows no IMEI in normal mode can repair it on HCU http://hcu-client.com/

[131XIII]

Hey, I have the same problem
In first method i have info "Acces violation at address 007E1AC6 in module DC Phoenix_v46.exe.Read of address 0B6DC350
What i do wrong?
I use software from easy software, frd-al00C00B175
I must use 2 method?

[Valdemaras]

Hey, I have the same problem
In first method i have info "Acces violation at address 007E1AC6 in module DC Phoenix_v46.exe.Read of address 0B6DC350
What i do wrong?
I use software from easy software, frd-al00C00B175
I must use 2 method?

You must use latest DC-phoenix v47 version to solve this error.

[131XIII]

Okey
But I have another question
Where I can take right software for my model?
Now I have FRD-AL00C00B175 and I can't find this on support area

[Valdemaras]

Okey
But I have another question
Where I can take right software for my model?
Now I have FRD-AL00C00B175 and I can't find this on support area

It means we don't have this one at the moment. Can request files here: https://forum.dc-unlocker.com/forum/...-firmware-here

[131XIII]

Okey, but I can try flash another firmware for FRD-AL00?
I will not brick the device?

[Valdemaras]

Okey, but I can try flash another firmware for FRD-AL00?
I will not brick the device?

There is always a chance to brick a device when flashing, we won't know what bricks it what's not.

[Marcin Jakubowski]

Hello ! So yes, now I'm starting to write IMEI. After reading the information by HCU, I have such a printout. I am asking you to check if everything is fine and if after entering new IMEI the phone will work and there will be no message about Simlock.

Model: FRD-L19
IMEI: 86995***************
IMEI2: 000000000000000
IMEI3: 000000000000000
IMEISV: 75
Firmware ver.: FRD-C00B175
Vendor: hw
Country: default
FASTBOOT:FRD-C00B175_FASTBOOT
BOOT:FRD-C00B175_BOOT
RECOVERYunknow)
SYSTEM:FRD-C00B175_SYSTEM
MAINVER:FRD-C00B175
DATAVERunknow)
APTIME:Fri Dec 9 03:43:51 CST 2016
CUSTTIME:Fri Dec 9 04:12:14 CST 2016
RAM: 4G
eMMC: 32G

IMEI 1 Sim Lock status:
NET: unknown
NETSUB: unknown
SP: unknown

[Valdemaras]

Hello ! So yes, now I'm starting to write IMEI. After reading the information by HCU, I have such a printout. I am asking you to check if everything is fine and if after entering new IMEI the phone will work and there will be no message about Simlock.

Model: FRD-L19
IMEI: 86995***************
IMEI2: 000000000000000
IMEI3: 000000000000000
IMEISV: 75
Firmware ver.: FRD-C00B175
Vendor: hw
Country: default
FASTBOOT:FRD-C00B175_FASTBOOT
BOOT:FRD-C00B175_BOOT
RECOVERYunknow)
SYSTEM:FRD-C00B175_SYSTEM
MAINVER:FRD-C00B175
DATAVERunknow)
APTIME:Fri Dec 9 03:43:51 CST 2016
CUSTTIME:Fri Dec 9 04:12:14 CST 2016
RAM: 4G
eMMC: 32G

IMEI 1 Sim Lock status:
NET: unknown
NETSUB: unknown
SP: unknown

We do not know if there won't be message about sim lock. But it is ready for repair.

[Marcin Jakubowski]

So your "professional eye" does not see any contraindications before entering IMEI? Because, as you can see, in HCU it shows that IMEI 1 exists but when you enter * # 06 # it shows 0000000.

[Valdemaras]

So your "professional eye" does not see any contraindications before entering IMEI? Because, as you can see, in HCU it shows that IMEI 1 exists but when you enter * # 06 # it shows 0000000.

Your questions has nothing to do with what you asked before and what HCU shows... So i repeat again if you want to repair, go and proceed - it will be repaired for sure. We won't know about sim lock data.