No announcement yet.

Huawei p8 lite model PRA-LX1 ---- Manufacture mode to HiSuite mode loop.

  • Filter
  • Time
  • Show
Clear All
new posts

  • Huawei p8 lite model PRA-LX1 ---- Manufacture mode to HiSuite mode loop.

    Hi, I am trying to unlock a Huawei p8 lite 2017 model PRA-LX1.

    I have followed instructions and enabled dev mode on the phone and then dialed the code to access the project menu.
    From there I access background settings and then USB port settings and switch it to Manufacture mode.
    I then plug the phone into my PC with a USB cable and a popup appears showing the phone on charge mode.
    I switch it to data transfer mode.

    I use the DC unlocker 2 client to auto detect the phone but it cant find it.

    I check the background settings and find that the phone has switched from manufacture mode to HiSuite mode.

    If I switch it back to manufacture mode it brings up the prompt showing the phone is on charge mode and if i switch to data transfer it switches to hisuite mode.

    Could someone please tell me what I am doing wrong?

  • #2
    I see my mistake is switching to file transfer.

    When I run the auto detect it dousnt work though all i get is:

    Before detection Huawei Android phones, enable 'Manufacture' mode:
    in dial pad type *#*#2846579#*#* for Qualcomm and Kirin based models, or *#*#14789632#*#* for MTK, then select
    'Background settings',
    'USB ports settings',
    'Manufacture mode'.

    Step by step guide for other Huawei phone unlock:

    ================================================== =================

    DC - Unlocker 2 Client 1.00.1429

    Detecting phone :

    selection :
    manufacturer - Huawei phones
    model - Auto detect (recommended)

    Found Applications port COM7

    ================================================== =================


    • #3
      Means your phone is running android 8 or later with latest security patches that are not serviceable by our tools.