Problem unbrick Huawei P20 Lite (ANE-LX1)

[Elypko]

If during firmware, oeminfo is not flashed and rpmb is not flashed, this is memory
It is advisable to change it. Emmc is in R / O mode

If you are really right about "Read only", then just remove emmc and fix on the programmer.

[gsmgeo]

I have the exact same problem that Elypko described

but is not the emmc absolutely repairable?

If during firmware, oeminfo is not flashed and rpmb is not flashed, this is memory
It is advisable to change it. Emmc is in R / O mode

[mistermejo]

I have the exact same problem that Elypko described

but is not the emmc absolutely repairable?

[gsmgeo]

Hi, I have a completely brick huawei p20 lite (ANE-LX1) ... I purchased the license for 3 days and I tried all the procedures indicated in the guide but it continually gives me the same error that is this:





DC Phoenix 0.0.0.118
user:nemesis40

Looking for a device in force upgrade mode
Device detected:
COM46: HUAWEI USB COM 1.0 (COM46)
18/03/2020 20:20:05 Starting to write device in FASTBOOT mode...
File to update: C:\ANE-BD_1.0.0.39_Board_Software_Android_8.0_EMUI_8.0_05 022JKP.dgtks
Device detected:
COM46: HUAWEI USB COM 1.0 (COM46)

Process identifier:23535124


Writing bootloader...
Step 1...
Step 2...

Waiting for device REMOVAL/INSERTION...

Waiting for fastboot device...
Device found: 0123456789ABCDEF


Looking for a device in fastboot mode
Device found: 0123456789ABCDEF


Getting IMEI...
Getting build number...
Getting model ...
Getting model by product ...
Getting model by roduct ...
Getting battery state...

USB Device REMOVAL
Type: @oem162.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35999569&0&3

Getting backdoor info...
Getting lock state info...

USB Device INSERTION
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 0123456789ABCDEF

Getting lock boot info...

Model: hi6250
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Erasing ver .. .
Cannot get FBlock info from device
Cannot get HW FBlock info from device

Erasing nvme partition
ERASE partition nvme : FAIL failed to get storage_ops

Erasing cust partition
ERASE partition cust : FAIL failed to get storage_ops

Erasing product partition
ERASE partition product : FAIL failed to get storage_ops

Erasing version partition
ERASE partition version : FAIL failed to get storage_ops

Erasing misc partition
ERASE partition misc : FAIL failed to get storage_ops

Erasing userdata partition
ERASE partition userdata : FAIL failed to get storage_ops

Writing xloader partition

USB Device REMOVAL
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 0123456789ABCDEF

Waiting for answer...

USB Device INSERTION
Type: @oem162.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35999569&0&3

XLOADER partition update FAIL
Fatal error: Cannot access to device
18/03/2020 20:20:50 Writing device finished - INCOMPLETE





If there is no possibility to repair it, I would like a refund. THANK YOU

User: nemesis40

emmc dead
*********************************************

[Elypko]

I join the question. ane-lx1 after updating by air. Only huawei usb com 1.0 works. Using MRT, it switches to fastboot, but when trying to flash any partition, it switches back to huawei usb com 1.0. At the same time, the phone periodically updates the USB connection. I wanted to pay for access to Phoenix, but now I doubt looking at this post.

[mistermejo]

Hi, I have a completely brick huawei p20 lite (ANE-LX1) ... I purchased the license for 3 days and I tried all the procedures indicated in the guide but it continually gives me the same error that is this:





DC Phoenix 0.0.0.118
user:nemesis40

Looking for a device in force upgrade mode
Device detected:
COM46: HUAWEI USB COM 1.0 (COM46)
18/03/2020 20:20:05 Starting to write device in FASTBOOT mode...
File to update: C:\ANE-BD_1.0.0.39_Board_Software_Android_8.0_EMUI_8.0_05 022JKP.dgtks
Device detected:
COM46: HUAWEI USB COM 1.0 (COM46)

Process identifier:23535124


Writing bootloader...
Step 1...
Step 2...

Waiting for device REMOVAL/INSERTION...

Waiting for fastboot device...
Device found: 0123456789ABCDEF


Looking for a device in fastboot mode
Device found: 0123456789ABCDEF


Getting IMEI...
Getting build number...
Getting model ...
Getting model by product ...
Getting model by roduct ...
Getting battery state...

USB Device REMOVAL
Type: @oem162.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35999569&0&3

Getting backdoor info...
Getting lock state info...

USB Device INSERTION
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 0123456789ABCDEF

Getting lock boot info...

Model: hi6250
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Erasing ver .. .
Cannot get FBlock info from device
Cannot get HW FBlock info from device

Erasing nvme partition
ERASE partition nvme : FAIL failed to get storage_ops

Erasing cust partition
ERASE partition cust : FAIL failed to get storage_ops

Erasing product partition
ERASE partition product : FAIL failed to get storage_ops

Erasing version partition
ERASE partition version : FAIL failed to get storage_ops

Erasing misc partition
ERASE partition misc : FAIL failed to get storage_ops

Erasing userdata partition
ERASE partition userdata : FAIL failed to get storage_ops

Writing xloader partition

USB Device REMOVAL
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 0123456789ABCDEF

Waiting for answer...

USB Device INSERTION
Type: @oem162.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35999569&0&3

XLOADER partition update FAIL
Fatal error: Cannot access to device
18/03/2020 20:20:50 Writing device finished - INCOMPLETE





If there is no possibility to repair it, I would like a refund. THANK YOU

User: nemesis40