Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Huawei Nova (CAN-L01) - Boot Loop - FRP Lock

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Huawei Nova (CAN-L01) - Boot Loop - FRP Lock

    Hi,

    Interested to know if DC-Phoenix will work for my situation.

    I have a Huawei Nova (CAN-L01) stuck in boot loop with FRP locked.

    I can get into Fastboot mode.
    I cannot get into ADB mode. I expect dev options have not been set. (And can't set them because of boot loop)

    I cannot reflash any image with Huawei official firmware via fastboot.
    I have tried many images (Recovery, boot, system, etc)
    All fail with FRP error (Factory Reset Protection)

    I cannot reflash any image with Huawei official firmware via UPDATE.APP in dload folder on SD card.
    Most images stop at 5% then eventually reboot after some time.
    Some images get to 7% and stop with an error.

    Current phone version is CAN-L01C432B131
    It was bought in the UK.

    I used FirmwareFinder to get the images i have used.
    Firmware Finder does not have an image for CAN-L01C432B131, however does have many images for CAN-L01C432B320 and above.

    I would like to know if DC-Phoenix will work in this stutaion and:
    - Allow me to flash recovery
    - Allow me to restore phone to factory settings
    - Unlock FRP
    - Unlock bootloader

    And would like to know which is the best image I should be using to restore to factory.

    Thanks in advance.
    Tags: None
  • #2
    There is no guarantee - for any image, it is flashing.
    >>Free Octohide VPN for Android, find it on Google Play Here<<

    Comment

    • #3
      I understand there is no Guarantee.
      I suppose what I am asking, will DC-Phoenix allow me to unlock FRP and Bootloader for this device?

      Comment

      • #4
        No, it will not. It can bypass them, but you won't get frp lock/phone lock status changes on fastboot screen if that's what you are asking.
        >>Free Octohide VPN for Android, find it on Google Play Here<<

        Comment

        • #5
          Hi,

          I have purchased 72 hour thingy - junkie69 username.

          I downloaded drivers from here: https://files.dc-unlocker.com/share....AEB5D1E2FA9C10
          I downloaded DC-Phoenix - version 0.0.0.126 from here
          Removed SD Card and smi card from phone.
          Connected phone in fast boot mode. (Screen showed green android with "FASTBOOT&amp;RESCUE MODE" as title of screen.

          Confirmed version of phone CAN-L01C432B131 (fastboot oem get-build-number)
          Downloaded Firmware from https://www.dc-unlocker.com/firmware-catalog
          - Cannes-L01_C432B382_Firmware_Austria_Bulgaria_Croatia_Rom ania_Slovenia_Nonspecific_Android_7.0_EMUI_5.0.1.A PP

          Prior to update, DC-Phoenix Look like this:
          DC-Phoenix B4 Update.png

          Clicked on update.

          Portion of log here:
          ~~~~~~~~~~~~~~~~~
          Erasing ver .. .
          Writing rescue_recovery partition
          RESCUE_RECOVERY partition update ...OK
          Uptade recovery parttion OK
          Looking for device in upgrade mode...
          ~~~~~~~~~~~~~~~~~

          While the update process was looking for device in upgrade mode, the phone screen changed to a circle with USB symbol in the middle and said installing update.
          Phone stopped at 5%.

          During update process I got the dialog box that says to manually enter upgrade mode.
          I can get the phone manually into the same mode (holding the Vol+ and Vol- keys.)
          Is this the Upgrade mode?

          I think the issue maybe, I cant turn the phone off, then use vol+ and vol- keys, then plug in. Due to boot loop..

          Can you please advise suggestions?

          Full log below.
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          DC Phoenix 0.0.0.126
          user:junkie69


          Standard update
          Not Reboot NOT cheked
          Update Verlist to server on file load NOT checked
          Try Rescue Recovery checked
          Bypass version check NOT checked
          Old slow algo NOT checked

          Looking for a device in upgrade mode
          No devices detected in upgrade mode
          Device found: 84HDU16906001257

          Extracting recovery partition

          Extracting partition: RECOVERY
          RECOVERY partition extracted

          08/05/2020 9:50:33 PM Starting to try Rescue Recovery...


          Looking for a device in fastboot mode
          Device found: 84HDU16906001257


          Getting IMEI...
          Getting build number...
          Getting model ...
          Getting battery state...
          Getting backdoor info...
          Getting lock state info...
          Getting lock boot info...

          SN:84HDU16906001257
          IMEI:861963030026477
          Build number: CAN-L01C432B131
          Model: HUAWEI CAN-L01
          Vendor/Country: hw/eu
          battery is present
          OEM lock state info:
          user Lock state is lock

          fbLock state is lock

          OEM get bootinfo:
          *******************************************

          Image is origin

          Verify mode is logging

          Check root info is safe

          Lock state is lock

          Root State: ROOT

          *******************************************



          Process identifier:24316906


          Erasing ver .. .
          Cannot get FBlock info from device
          Trying to unlock device...

          Signing process may take few minutes

          Trying to get data from server
          Unlock process finished successfully


          Erasing ver .. .
          Writing rescue_recovery partition
          RESCUE_RECOVERY partition update ...OK
          Uptade recovery parttion OK
          Looking for device in upgrade mode...

          USB Device REMOVAL
          Type: @oem32.inf,%singlebootloaderinterface%;Android Bootloader Interface
          VidPid: VID_18D1&amp;PID_D00D
          Instance id: 84HDU16906001257


          USB Device INSERTION
          Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
          VidPid: VID_12D1&amp;PID_107D
          Instance id: 84HDU16906001257


          USB Device REMOVAL
          Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
          VidPid: VID_12D1&amp;PID_107D
          Instance id: 84HDU16906001257

          Process was cancelled by user
          Enter recovery mode FAIL

          Cannot enter in Recovey mode
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

          Comment

          • #6
            No, maybe only discharging phone completely and only then trying to put it manually or during it's bootloop.
            >>Free Octohide VPN for Android, find it on Google Play Here<<

            Comment

            • #7
              Ok. Phone turned off eventually.
              Help Vol- and Vol+ for about 5 secs.
              Then plugged in to PC.
              Phone went staight to the installing circle and stopped at 5% again.
              Installing Update.png

              DC-Phoenix not recognising device outside of fastboot mode.

              Please advise next steps.
              Or if DC-Phoenix cannot flash, then please provide money back.

              Cheers


              Comment

              • #8
                Please advise what my next steps could be.
                My 72 hours is running out.

                Comment

                • #9
                  Originally posted by junkie69 View Post
                  Please advise what my next steps could be.
                  My 72 hours is running out.
                  I see a mistake in your work
                  try flashing without rescue mode

                  Comment

                  • #10
                    Please extend my licence.
                    I have wasted so much of the 72 hours, waiting for responses to my questions above due to time zone differences.
                    I am only attempting this on a single device.
                    Which you should be able to see from the logs:
                    i.e. Device - 84HDU16906001257.

                    Please help.

                    Comment

                    Previous template Next
                    Working...
                    X

                    We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                    By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                    I Agree