Huawei P10 Plus VKY-L09 unable to unbrick & DC Unlocker software locked to other pc

[deliverance87]

This does not mean that the battery is charged. In this state, the phone cannot charge it!
You need to check the battery voltage itself. I am sure the matter is in it.
And yes look PM

What do you mean with "PM" ?

[gsmgeo]

I'm sure battery is fully charged, it charges via USB and if I leave the phone connected it also gets hot

This does not mean that the battery is charged. In this state, the phone cannot charge it!
You need to check the battery voltage itself. I am sure the matter is in it.
And yes look PM

[deliverance87]

I understood . But in order to flash board firmware, you need a charged battery

I'm sure battery is fully charged, it charges via USB and if I leave the phone connected it also gets hot

[gsmgeo]

I'm sorry I don't think I did that, I didn't open the phone, it simply does not turn on and shows no signs of life, only connected to computer via usb is recognized as
HUAWEI USB COM 1.0

I understood . But in order to flash board firmware, you need a charged battery

[deliverance87]

do you have a multimeter? how do you connect testpoint?
You need to separately check the battery with a multimeter

I'm sorry I don't think I did that, I didn't open the phone, it simply does not turn on and shows no signs of life, only connected to computer via usb is recognized as
HUAWEI USB COM 1.0

[gsmgeo]

Thank you for your suggestion, how do I do that?

do you have a multimeter? how do you connect testpoint?
You need to separately check the battery with a multimeter

[deliverance87]

Thank you for your suggestion, how do I do that?

[gsmgeo]

Hello there, I've found the file you mentioned in the download files section and I've tried with both

VKY-Downgrade-Board-A066-7.0.0_r1.dgtks

and

VKY-Full-Repair-NV-included-Board-A066-7.0.0_r1.dgtks


but none work, it keep telling

Error writing Bootloader
23/05/2020 22:13:48 Writing device finished - INCOMPLETE


This is the full log:

DC Phoenix 0.0.0.131
user:deliverance87


Standard update
Not Reboot NOT cheked
Update Verlist to server on file load NOT checked
Try Rescue Recovery checked
Bypass version check NOT checked
Old slow algo checked

Looking for a device in force upgrade mode
Device detected:
COM6: HUAWEI USB COM 1.0 (COM6)
23/05/2020 22:13:23 Starting to write device in FASTBOOT mode...
File to update: D:\Downloads\VKY-Downgrade-Board-A066-7.0.0_r1.dgtks
Device detected:
COM6: HUAWEI USB COM 1.0 (COM6)

Process identifier:24665972


Writing bootloader...
Step 1...

USB Device REMOVAL
Type: @oem15.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35eda8e7&0&1


USB Device INSERTION
Type: @oem15.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35eda8e7&0&1


Error writing Bootloader
23/05/2020 22:13:48 Writing device finished - INCOMPLETE

Check battery

[deliverance87]

Hello there, I've found the file you mentioned in the download files section and I've tried with both

VKY-Downgrade-Board-A066-7.0.0_r1.dgtks

and

VKY-Full-Repair-NV-included-Board-A066-7.0.0_r1.dgtks


but none work, it keep telling

Error writing Bootloader
23/05/2020 22:13:48 Writing device finished - INCOMPLETE


This is the full log:

DC Phoenix 0.0.0.131
user:deliverance87


Standard update
Not Reboot NOT cheked
Update Verlist to server on file load NOT checked
Try Rescue Recovery checked
Bypass version check NOT checked
Old slow algo checked

Looking for a device in force upgrade mode
Device detected:
COM6: HUAWEI USB COM 1.0 (COM6)
23/05/2020 22:13:23 Starting to write device in FASTBOOT mode...
File to update: D:\Downloads\VKY-Downgrade-Board-A066-7.0.0_r1.dgtks
Device detected:
COM6: HUAWEI USB COM 1.0 (COM6)

Process identifier:24665972


Writing bootloader...
Step 1...

USB Device REMOVAL
Type: @oem15.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35eda8e7&0&1


USB Device INSERTION
Type: @oem15.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&35eda8e7&0&1


Error writing Bootloader
23/05/2020 22:13:48 Writing device finished - INCOMPLETE

[deliverance87]

Thank you for your reply, where I can get this file? By the way, software still locked and I only got 1 day and half left to use the program

[gsmgeo]

Hello, there I've bought some hours ago a license to use dc-unlocker, I installed the software on my friend pc, phone of which I was trying to unlock. Unfortunately I didn't succeded, so I took his phone and went back to my home to further investigate but I cannot start the software on my pc, it tells software pc locked, can you please unlock it?

My user id : deliverance87


Also, I was unable to unbrick the phone, it says bootloader error, tried to flash method 3 of huaewi unbrick guide on a EU vky-l09 with the vky-l09 board full repair with nv firmware but it keep saying bootloader writing error

Support will answer you soon but the unit is automatically removed after 24 hours.
In your recovery case
Your need board
VKY-Downgrade-Board-A066-7.0.0_r1.dgtks

[deliverance87]

Hello, there I've bought some hours ago a license to use dc-unlocker, I installed the software on my friend pc, phone of which I was trying to unlock. Unfortunately I didn't succeded, so I took his phone and went back to my home to further investigate but I cannot start the software on my pc, it tells software pc locked, can you please unlock it?

My user id : deliverance87


Also, I was unable to unbrick the phone, it says bootloader error, tried to flash method 3 of huaewi unbrick guide on a EU vky-l09 with the vky-l09 board full repair with nv firmware but it keep saying bootloader writing error