Unconfigured Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
Cannot Recover Bricked MediaPad M5 8.4 WiFi
Collapse
X
-
Don't really know what else it could be, device behaves like that when it's battery is not charged enough, maybe this is current problem.
-
I've tried that, with no sd card inside of the tray. It immediately just vibrates and powers back off.
Leave a comment:
-
You need to hold both vol buttons while phone is off, then connect it to usb to enter upgrade mode via usb, otherwise it tries to enter upgrade mode from sd card.
Leave a comment:
-
As in, holding down both Volume Up, Down, and the Power button? I feel the device vibrate, but it turns off immediately.
Leave a comment:
-
Can your device enter upgrade mode manually if you try to put in it using button combo?
Leave a comment:
-
Cannot Recover Bricked MediaPad M5 8.4 WiFi
I've been trying (unsuccessfully) to try and repair my bricked MediaPad M5 8.4 Wifi model (SHT-W09). I've tried two different firmwares (EMUI 8.0 and 9.1), to no avail.
Here is the log from an attempt with 9.1 (8.0 does the same). After applying the recovery portion of the image, it restarts and cannot proceed any further.
Code:DC Phoenix 0.0.0.132 user:wwkchan Standard update Not Reboot NOT cheked Update Verlist to server on file load NOT checked Try Rescue Recovery checked Bypass version check checked Old slow algo NOT checked Looking for a device in upgrade mode No devices detected in upgrade mode Device found: CNJ6R18509003780 Detecting recovery partition File size: 3,827,552,440 bytes Current version(CURVER): SHT-W09_Global-CUST 9.0.1(C999) ERECOVERY_KERNEL partition found ERECOVERY_RAMDISK partition found ERECOVERY_VENDOR partition found 2020-05-31 10:17:38 AM Starting to try Rescue Recovery... Looking for a device in fastboot mode Device found: CNJ6R18509003780 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... Build number: :SHT-W09 9.1.0.333(C432E3R1P2) Model: SHT-W09 Vendor/Country: hw/eu Battery state: 9182mv OEM lock state info: FB LockState: LOCKED USER LockState: LOCKED OEM get bootinfo: locked Getting base version... Base Version: SHT-LGRP3-OVS 9.1.0.333 Getting cust version... Cust Version: SHT-W09-CUST 9.1.0.3(C432) Getting preload version... Preload Version: SHT-W09-PRELOAD 9.0.1.2(C432R1) Process identifier:24843043 Erasing ver .. . File size: 3,827,552,440 bytes Current version(CURVER): SHT-W09_Global-CUST 9.0.1(C999) Writing rescue_recovery_kernel partition RESCUE_RECOVERY_KERNEL partition update ...OK Writing rescue_recovery_ramdisk partition RESCUE_RECOVERY_RAMDISK partition update ...OK Writing rescue_recovery_vendor partition RESCUE_RECOVERY_VENDOR partition update ...OK Uptade recovery parttion OK USB Device REMOVAL Type: @oem54.inf,%singlebootloaderinterface%;Android Bootloader Interface VidPid: VID_18D1&PID_D00D Instance id: CNJ6R18509003780 Looking for device in upgrade mode... Process was cancelled by user Enter recovery mode FAIL Cannot enter in Recovery mode
Tags: None
Leave a comment: