Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Unlock bootloader of a P20 PRO CLT-L29 via HCU

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Unlock bootloader of a P20 PRO CLT-L29 via HCU

    Hi,
    I wanted to unlock the bootloader of a P20 PRO CLT-L29 via HCU with the guide in https://hcu-client.com/huawei-bootlo...via-testpoint/.
    From what i read, i need to have the device in test point mode so i follow the guide.
    The guide told me to use phoenix to put it in TP so i tried that with the guide
    I then tried to enable the TP mode with phoenix while having the phone on ADB mode. I also installed the drivers obviously (hisuite).

    The problem is the phone now is dead, it won't turn on or do anything, can you help me?
    I attach the log of the software here.

    DC Phoenix 0.0.0.164
    userrowy


    Doing job: Enable software testpoint

    Looking for devices...

    Looking for devices by ports
    No device deteced
    Number of devices found: 1
    Number of devices found: 1
    Device authorized
    Base Version:CLT-LGRP2-OVS 9.1.0.387
    Cust Version:CLT-L29-CUST 9.1.0.8(C432)
    Preload Version:CLT-L29-PRELOAD 9.1.0.11(C432R1)
    Name:CLT-L29
    Model:CLT-L29
    Board:CLT

    USB Device REMOVAL
    Type: @oem135.inf,%busfilter.devicedesc%;USB Composite Device
    VidPid: VID_12D1&PID_107E
    Instance id: WCR0218609002527
    Looking for device in upgrade mode...

    USB Device INSERTION
    Type: @oem135.inf,%busfilter.devicedesc%;USB Composite Device
    VidPid: VID_12D1&PID_107E
    Instance id: WCR0218609002527
    COM6: DBAdapter Reserved Interface (COM6)
    COM8: Android Adapter PCUI (COM8)
    Devices detected in UPDATE mode

    05/02/2022 17:38:55 Starting to write device in UPGRADE mode...
    Device found: WCR0218609002527



    05/02/2022 17:38:57 start to update enable testpoint
    File to update: ENABLE_TESTPOINT.dtwork

    Process identifier:39753808

    Validating file...
    Looking for attached port...
    Preparing to write...
    Bypass version checked
    Checking partition ...

    Extracting partition SHA256RSA...
    Writing partition: SHA256RSA...
    Writing partition: SHA256RSA...OK

    Extracting partition CRC...
    Writing partition: CRC...
    Writing partition: CRC...OK

    Extracting partition BASE_VERLIST...
    Writing partition: BASE_VERLIST...
    Writing partition: BASE_VERLIST...OK

    Extracting partition PACKAGE_TYPE...
    Writing partition: PACKAGE_TYPE...
    Writing partition: PACKAGE_TYPE...OK

    Extracting partition XLOADER...
    Writing partition: XLOADER...
    Writing partition: XLOADER...OK
    Software written
    05/02/2022 17:39:08 Writing device finished OK


    After this final log the phone went off and i can't do anything now. any help?
    Tags: None
  • #2
    So maybe it did enter testpoint mode?, Haven't you checked device manager on pc to see where your phone appears there, maybe haven't installed testpoint drivers from the guide. Testpoint mode is indeed a black screen. If you see something like "USB ser" with "!" marks then means drivers are missing. Testpoint drivers may find in this guide: https://www.dc-unlocker.com/dcphoeni...le-software-tp
    >>Free Octohide VPN for Android, find it on Google Play Here<<
    • Likes 1

    Comment

    • #3
      Originally posted by Valdemaras View Post
      So maybe it did enter testpoint mode?, Haven't you checked device manager on pc to see where your phone appears there, maybe haven't installed testpoint drivers from the guide. Testpoint mode is indeed a black screen. If you see something like "USB ser" with "!" marks then means drivers are missing. Testpoint drivers may find in this guide: https://www.dc-unlocker.com/dcphoeni...le-software-tp

      You are absolutely right. I did not have the drivers for testpoint mode.
      By installing them i was able to see the device in HUAWEI USB COM 1.0

      Then i went on, i managed to find the right bootloader and HCU unlocked managed to unlock the bootloader correctly.

      Now i'm following this guide https://www.dc-unlocker.com/dcphoeni...ware-testpoint
      to disable testpoint mode.
      I did what the guide said but the device is still visible as HUAWEI USB COM 1.0 in ports even though the process has finished successfully.
      The phone right now is in eRecovery mode and if i reboot , it always goes to eRecovery mode.
      Here my only options are: reboot, shutdown, or connect to wifi to "Download latest version and recovery"
      What should i do now to turn on the phone correctly? If i reboot it always goes to eRecovery.
      Can you help me?
      Thanks in advance

      here's the log

      userrowy


      Doing job: Disable software testpoint

      Looking for devices...

      Looking for devices in testpoint mode
      No devices detected in testpoint mode
      Device found: WCR0218609002527


      07/02/2022 09:55:44 Starting to write device in FASTBOOT mode...

      Looking for a device in fastboot mode
      Device found: WCR0218609002527


      Getting IMEI...
      Getting build number...
      Getting model ...
      Getting battery state...
      Getting backdoor info...
      Getting lock state info...
      Getting lock boot info...

      Build number: :CLT-L29 9.1.0.387(C432E8R1P11)
      Model: CLT-L29
      Vendor/Country: hw/eu
      Battery state: 0
      OEM lock state info:
      FB LockState: UNLOCKED
      USER LockState: LOCKED
      OEM get bootinfo:
      unlocked


      Process identifier:39774860

      Validating file...
      Getting lock state info...
      Getting ptable_lu3 parttion info...

      Getting xloader parttion info...
      XLOADER first block hash check success
      XLOADER second block hash check success
      XLOADER fastboot length check success
      XLOADER third block hash check success
      flash XLOADER. Trying to adjust XLOADER file length
      Writing xloader partition
      XLOADER partition update ...OK
      Erasing MISC partition
      Partition MISC erased

      Erasing all ver .. .

      USB Device REMOVAL
      Type: @oem134.inf,%hwfastboot%;Android Sooner Single ADB Interface
      VidPid: VID_18D1&PID_D00D
      Instance id: WCR0218609002527
      Software written
      07/02/2022 09:55:54 Writing device finished OK
      Last edited by Prowy; 2022-02-07, 08:16 AM.

      Comment

      • #4
        Did you use bootloader unlock or read bootloader code from it? Also have you done anything to mobile - flashed, etc. after unlocking it?
        >>Free Octohide VPN for Android, find it on Google Play Here<<
        • Likes 1

        Comment

        • #5
          Originally posted by Valdemaras View Post
          Did you use bootloader unlock or read bootloader code from it? Also have you done anything to mobile - flashed, etc. after unlocking it?
          I did not do anything else, flashing etc.
          I did what the guide here said https://hcu-client.com/huawei-bootlo...via-testpoint/ in order to unlock the bootloader.
          I Set bootloader lock status to “Bootloader lock: unlocked” and followed the steps in the guide.

          Then i disabled testpoint mode with this guide https://www.dc-unlocker.com/dcphoeni...ware-testpoint.
          The log is in the other message.

          After disabling testpoint mode the phone went in eRecovery mode and i can only do 3 things:
          Reboot
          Shutdownn
          Download latest version and recovery

          What should i do in order to turn on the phone correctly? Download latest version and recovery or something else?
          Sorry for disturbing you, thanks in advance

          Comment

          • #6
            But this guide is for Kirin710 and Kirin980 based devices, as shown in the feature table in that guide. Your phone is supported only for bootloader code read service. https://hcu-client.com/hcu-features-by-tp-xloader/
            >>Free Octohide VPN for Android, find it on Google Play Here<<

            Comment

            Previous template Next
            Working...
            X

            We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

            By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

            I Agree