HUAWEI Medipad T3 10 / AGS-W09 not recognize

[chris_wafer]

Hello,

I have "HUAWEI Medipad T3 10 / AGS-W09" with build number "AGS-W09C100B271" and Android version 7.
I succeed to pass to maintenance mode, but this phone is not recognized in DC unlocker.
Help please.

[Vincentas]

What are you trying to do by using our software? You can try to use hcu-client software instead of dc-unlocker. It has more functions for phones/tables than dc-unlocker. Same login would work.

[chris_wafer]

I have just installed HCU Client v1.0.0.0382.
I have selected "Manufacture Mode".
It is recognized with HiSuite, but the message when click "Read phone info" with HCU Client is "Phone not found".
What is the problem?
Thanks for your answer.

[Valdemaras]

Have you closed hisuite before using our software and made sure it is not left running in the background, have you put your device in manufacture mode as per the tutorial?

[chris_wafer]

Hisuite launch automatically when the device is connected. A code is requested. I enter the code to connect correctly the device. After that I have to close and kill the Hisuite process?

[Valdemaras]

Correct or disable auto launch of hisuite through its settings.

[chris_wafer]

The resultat with DC unlocker :

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Applications port COM9
Found Diagnostics port COM10

Found Phone : AGS-W09
Model : Huawei Qualcomm Android phone
IMEI : JPNU17B29106570
Serial NR. : 4JPNU17B29106570
Firmware : MSM8917C00B027_AMSSJul27201816:04:54
Hardware ver. : SH1AGSW09M

================================================== =================

Reading bootloader code...

No response !

================================================== =================

Reading bootloader code...

Invalid command

================================================== =================

Where is the problem?

[Valdemaras]

Use this software https://hcu-client.com/ to read bootloader code from it, you may use same account as one that you have for DC-unlocker.

[chris_wafer]

Unfortunately, I'm using dc-unlocker on a virtual machine with Windows, because I'm currently on Linux.
Is it not possible with dc-unlocker on Virtual Machine?

[Valdemaras]

It is not.

[chris_wafer]

I disabled HiSuite from automatically launching when the tablet is connected.
I connect my tablet via the USB cable and I do the manipulations to switch to “Manufacture Mode”.
I check in device manager :

• Modems / Android Adapter Modem
• Ports (COM)
  • Android Adapter PCUI (COM9)
  • DBAdapter Reserved Interface

I launch "HCU Client" in Autodetect with "Manufacture mode (COM ports)" and the result is : "Phone not found".

An idea for this problem?

Thanks.

[Valdemaras]

Maybe in the device manager, it has "!" or "?" signs next to port names that belong to it. Also, please check in the device manager, maybe it also created an Android device on top of the Device manager list, sometimes users need to disable that one to detect it. If the computer is normal and not a VM then it will certainly get detected. If possible let us know what Android and service patch your unit runs.

[chris_wafer]

I have succeded to read phone info on "HCU Client", but not "bootloader code". HELP, HELP!

Here are the screenshots :
capture01.jpg

Capture02.jpg

Capture03.jpg

Capture04.jpg


Screenshot_20240729-212330.png



Read phone info :

29/07/2024 21:16:41
HCU Client v1.0.0.0382
Account: chris_wafer

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode


Read phone info
2024-07-29 21:17:55.045 Found fastboot device 4JPNU17B29106570
2024-07-29 21:17:55.045 Read phone info done!

SN: 4JPNU17B29106570


2024-07-29 21:17:55.216 Phone info data backup saved to file C:\Users\chris\Downloads\HCU_0382\Backup\20240729_ 211755_4JPNU17B29106570.BAK

Read bootloader code :

29/07/2024 21:19:13
HCU Client v1.0.0.0382
Account: chris_wafer

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode


Read Bootloader code

2024-07-29 21:19:13.076 Autodetect COM port and phone type start!

Read bootloader code fail!
Phone not found !

HELP HELP!

[Valdemaras]

In your info it shows that it detects as fastboot device at the moment

2024-07-29 21:17:55.045 Found fastboot device 4JPNU17B29106570

Which is an incorrect mode/detection for code read. Try to disable (right-click "disable") one of the lines or both from the Android section in the device manager and then restart HCU and repeat the detection, and code read process.