ZTE MF90 4G not supported

[Scribbie]

Please try this - uninstall that software that you had installed before for your device from devices drive/cdrom

Then reconnect mf90 to pc, go to computer area and eject drive/cdrom of your device that should appear there again after uninstalling software.

Then go to device manager and see if anything popped up related your device.

Nothing changed.. same issue remains with no change whatsoever.

Here it even shows how the computer is dealing with the device and what sort of hardware is being detected:



Those are exactly what I find within the device manager and nothing else...

[Valdemaras]

Nothing changed.. same issue remains with no change whatsoever.

Here it even shows how the computer is dealing with the device and what sort of hardware is being detected:



Those are exactly what I find within the device manager and nothing else...

Its not visible from this size screenshot, you should attempt to detect your device on another pc and check if it is recognized same way in device manager.

[Scribbie]

Its not visible from this size screenshot, you should attempt to detect your device on another pc and check if it is recognized same way in device manager.

I admire your commitment to trying to help us all out in here.. so, thank you.

I tried it on two different devices which also run on different Windows versions (7 and XP). The result was identical.

I did notice something though. I kept the Device Manager window up and observed it as I attached the device. While the computer was detecting it, I did notice an "other devices" entity appear only very very briefly.. for like less than a second. and then it disappears which is when the other "hardware" appear: the Disk drive MMC storage device, the portable device drive, the CD ROM drive, and the usb mass storage drive.....

[Valdemaras]

I admire your commitment to trying to help us all out in here.. so, thank you.

I tried it on two different devices which also run on different Windows versions (7 and XP). The result was identical.

I did notice something though. I kept the Device Manager window up and observed it as I attached the device. While the computer was detecting it, I did notice an "other devices" entity appear only very very briefly.. for like less than a second. and then it disappears which is when the other "hardware" appear: the Disk drive MMC storage device, the portable device drive, the CD ROM drive, and the usb mass storage drive.....

Lets try one more thing then. Access MF90 web panel and let us know address by which you access it, then we will check for further possible steps to take to detect your device.

[Scribbie]

Lets try one more thing then. Access MF90 web panel and let us know address by which you access it, then we will check for further possible steps to take to detect your device.

Well I access the web ui through 192.168.0.1

that's what you meant right?

[Valdemaras]

Well I access the web ui through 192.168.0.1

that's what you meant right?

Yes, thats what i meant. Now try to paste this http://192.168.0.1/mode_switch.asp address into browser and hit enter, does anything happen, any extra window appears with options to choose on your side?

[Scribbie]

Yes, thats what i meant. Now try to paste this http://192.168.0.1/mode_switch.asp address into browser and hit enter, does anything happen, any extra window appears with options to choose on your side?

No, I get an "Access Error: Site or Page Not Found" :/

[Valdemaras]

No, I get an "Access Error: Site or Page Not Found" :/

I see, well then sorry seems your device is different from the other or something was done to it earlier that we are not aware off yet. Normally device appear in device manager when you eject it from computer area where it is visible as cdrom/drive.

[Scribbie]

I see, well then sorry seems your device is different from the other or something was done to it earlier that we are not aware off yet. Normally device appear in device manager when you eject it from computer area where it is visible as cdrom/drive.

Thank you for trying to help though. I did fear the same, though it is kind of weird since I only got the device from the same telecom company from which many others have bought it from and they could actually get it detected and then unlocked...

But oh well.. I'll keep messing around and hoping for the best.

Thanks again.

[ninogaviola]

I installed the driver but still there is an error "application port not found" my device is ZTE MF90 4G

[Valdemaras]

I installed the driver but still there is an error "application port not found" my device is ZTE MF90 4G

Make sure there are no "!" marks next to the lines in device manager that belongs to your MF90. Try to detect it with dc-unlocker_client-1.00.1057, download it here https://www.dc-unlocker.com/downloads

[ninogaviola]

Make sure there are no "!" marks next to the lines in device manager that belongs to your MF90. Try to detect it with dc-unlocker_client-1.00.1057, download it here https://www.dc-unlocker.com/downloads

yes all driver are install properly with having error. i get driver from the dc unlocker support

[ninogaviola]

yes all driver are install properly with having error. i get driver from the dc unlocker support

same on thing software port not found.

[Valdemaras]

same on thing software port not found.

Try to set com ports manually on DC-unlocker. Select model manually, then in port fields write in COM ports that are visible in device manager, Application port will be AT line, Diagnostics will have Same "Diagnostics" name or "Interface", try to detect it then.

[ninogaviola]

Try to set com ports manually on DC-unlocker. Select model manually, then in port fields write in COM ports that are visible in device manager, Application port will be AT line, Diagnostics will have Same "Diagnostics" name or "Interface", try to detect it then.

If i will choose manually it can't detect the modem.