K5008-Z driver issue after dc-unlocker auto-detect

[vendorgsm]

There are 3 failed drivers with the name "ZTE WCDMA Technologies MSM".


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_00
USB\VID_19D2&PID_1083&MI_00


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_01
USB\VID_19D2&PID_1083&MI_01


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_02
USB\VID_19D2&PID_1083&MI_02

[Valdemaras]

There are 3 failed drivers with the name "ZTE WCDMA Technologies MSM".


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_00
USB\VID_19D2&PID_1083&MI_00


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_01
USB\VID_19D2&PID_1083&MI_01


ZTE WCDMA Technologies MSM
Driver Hardware ID:

USB\VID_19D2&PID_1083&REV_F055&MI_02
USB\VID_19D2&PID_1083&MI_02

Try to manually apply these https://files.dc-unlocker.com/backen...A4F48B95B34CD2 drivers for all those lines. Extract downloaded driver pack, then go to device manager, right click on one of the lines that has "!" or "?" marks next to it and belongs to your k5008-z modem, then select update software/drivers or simila option, then manually direct to location where extracted driver folder is and apply. Let us know the result.

[dstamat]

Hi there,

I have the same issue. Scanning my ZTE K5008-Z with DC-unlocker disabled it completely. I tried downloading the drivers you suggest from https://files.dc-unlocker.com/backen...A4F48B95B34CD2 but the address is not responding. Could you please send me the correct URL so that I try to fix it?

Thank you in advance

[vendorgsm]

Drivers has been accepted, then I have tried to read the device without the diagnostic port, reading has been accepted but the device still not seen by the original software. Then I set the diagnostic port manually and read it again using the diagnostinc port this time and the device has been repaired and recognized by the original software!!!

Great work and real support!

Thank you!!!

[Valdemaras]

Drivers has been accepted, then I have tried to read the device without the diagnostic port, reading has been accepted but the device still not seen by the original software. Then I set the diagnostic port manually and read it again using the diagnostinc port this time and the device has been repaired and recognized by the original software!!!

Great work and real support!

Thank you!!!

If device does not work after unlock then, detect again in dc-unlocker and in unlocking tab click Disable diagnostics port button, then it should return to it's normal state. Thank you for your patience

[vendorgsm]

Dc-unlocker read my device as unlocked, without any attempt to unlock it, but I know that it is locked. Do you know why?

[Valdemaras]

Dc-unlocker read my device as unlocked, without any attempt to unlock it, but I know that it is locked. Do you know why?

There must be invalid/unsupported operator's sim inside it to get correct lock status on detection.

[vendorgsm]

True, my test was with accepted sim card inside. Thanks.

[Valdemaras]

True, my test was with accepted sim card inside. Thanks.

If possible provide us detect info of your device, can hide IMEI. Thank you.