Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

DC-Unlocker ZTE Routers unlocker client

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I think something is wrong with the router. I have return it to the store for repare.

    Comment


    • #17
      I have the same issue as idgforum. ( can see he is from sweden also, hejsan)

      the MF28D is configured as 192.168.32.1

      and my network card as 192.168.32.120

      this is my logs.

      {\rtf1\ansi\ansicpg1252\deff0\deflang1030{\fonttbl {\f0\fnil MS Sans Serif;}}
      {\colortbl ;\red0\green0\blue128;\red0\green0\blue0;\red166\g reen202\blue240;\red255\green0\blue0;\red0\green12 8\blue0;\red128\green128\blue128;}
      \viewkind4\uc1\pard\cf1\b\f0\fs20 DC-Unlocker - ZTE Routers Unlocker client v.1.0011\cf2\b0
      \par \cf3\i 2014-08-08 20:00:47\cf2\i0
      \par
      \par \cf1\b
      \par For correct communication with MF28 router, please configure router's network adapter to manual IP address 192.168.32.120 !
      \par \cf2\b0
      \par \b Found network adapters:
      \par \b0
      \par \cf1\b Qualcomm Atheros AR8172/8176/8178 PCI-E Fast Ethernet Controller (NDIS 6.20)\cf2\b0
      \par \cf1\b MAC address : \cf2\b0 20-25-64-1E-E0-51
      \par \cf1\b IP address : \cf2\b0 192.168.32.120
      \par \cf1\b Gateway : \cf2\b0 192.168.32.1
      \par \cf1\b Subnet Mask : \cf2\b0 0.0.0.0
      \par
      \par \cf4\b Wrong IP address!
      \par \cf2\b0
      \par \cf4\b Wrong IP address!
      \par \cf2\b0
      \par \cf4\b Wrong IP address!
      \par \cf2\b0
      \par \cf5\b Log sucessfully saved to file\cf2\b0
      \par \cf1\i "C:\\Users\\PC\\Documents\\ZTE MF28D\\2014-08-08_200136_log.rtf"
      \par \cf2\i0
      \par \cf1\b
      \par For correct communication with MF28 router, please configure router's network adapter to manual IP address 192.168.32.120 !
      \par \cf2\b0
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf4\b Device not ready!
      \par \cf2\b0
      \par \cf6 Ping test to router (192.168.32.1)... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.1)... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.1)... \cf4 failed!\cf2
      \par \cf4\b Device not ready!
      \par \cf2\b0
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf6 Ping test to router (192.168.32.120)... \cf5 OK\cf2
      \par \cf6 Switching router to FTM mode... \cf4 failed!\cf2
      \par \cf6 FTM setup 1... \cf4 failed!\cf2
      \par \cf4\b Device not ready!
      \par \cf2\b0
      \par
      \par }


      and second try........


      {\rtf1\ansi\ansicpg1252\deff0\deflang1030{\fonttbl {\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset0 MS Sans Serif;}}
      {\colortbl ;\red0\green0\blue128;\red166\green202\blue240;\re d0\green0\blue0;\red128\green128\blue128;\red0\gre en128\blue0;\red255\green0\blue0;}
      \viewkind4\uc1\pard\cf1\b\f0\fs20 DC-Unlocker - ZTE Routers Unlocker client v.1.0011
      \par \cf2\b0\i 2014-08-08 20:15:34\cf1\b\i0
      \par
      \par \cf3 20:15:37.903 Start Check account
      \par \cf1
      \par \cf4\b0 Connecting to server... \cf5 OK\cf1\b
      \par \cf4\b0 Send data to server... \cf5 OK\cf1\b
      \par \cf4\b0 Read data from server... \cf5 OK\cf1\b
      \par \cf4\b0 Disconnected from server!\cf1\b
      \par
      \par \cf3 20:15:38.636 \cf5 done!
      \par \cf1
      \par \cf3 Account status:\cf1
      \par User: \cf3\b0 ressurex\cf1\b
      \par Credits left: \cf3\b0 10
      \par \cf1\b
      \par \f1\'03\cf3\b0 7
      \par \cf1\b\f0
      \par For correct communication with MF28 router, please configure router's network adapter to manual IP address 192.168.32.120 !
      \par
      \par \cf3 Found network adapters:
      \par \cf1
      \par Remote NDIS based Internet Sharing Device #2
      \par MAC address : \cf3\b0 5A-2C-80-13-92-63\cf1\b
      \par IP address : \cf3\b0 192.168.1.100\cf1\b
      \par Gateway : \cf3\b0 192.168.1.1\cf1\b
      \par Subnet Mask : \cf3\b0 192.168.1.1
      \par \cf1\b
      \par Qualcomm Atheros AR8172/8176/8178 PCI-E Fast Ethernet Controller (NDIS 6.20)
      \par MAC address : \cf3\b0 20-25-64-1E-E0-51\cf1\b
      \par IP address : \cf3\b0 192.168.32.120\cf1\b
      \par Gateway : \cf3\b0 192.168.32.1\cf1\b
      \par Subnet Mask : \cf3\b0 0.0.0.0
      \par \cf1\b
      \par \cf4\b0 Ping test to router (192.168.32.1)... \cf6 failed!\cf1\b
      \par \cf4\b0 Ping test to router (192.168.32.1)... \cf6 failed!\cf1\b
      \par \cf4\b0 Ping test to router (192.168.32.1)... \cf6 failed!\cf1\b
      \par \cf6 Device not ready!
      \par \cf1
      \par
      \par }


      Comment


      • #18
        Hejsan ressurex!
        Googe translate from swedish:

        I was and submitting my router with "HI TRE" in their store today. They have released an update which will also enter through LAN cable. It does not work to uppdate, we got tjis message and you get to a stupid status page that will force you to update when you go out on the Internet. Therefore, I wanted my subscribe Internet back and only for med was to to unlock my router so I can have my another sim card from Telenor. But the router will not let DC-Unlocker - ZTE Routers unlocker client v.1.0011 in like the ISP TRE uppdate program. TRE said that many people have problems and want the routers in for troubleshooting.

        192.168.32.1 as the DC-Unlocker - ZTE Routers unlocker client v.1.0011 want to put the router in, it's same ip Canada ISP Rogers has their ZTE MF28 router set to. I think that's why the DC-Unlocker - ZTE Routers unlocker client v.1.0011 want to choose 32 as sub net. But it should be enough for us in Sweden to change to the standard subnet

        and the computer's ip should be set at 192.168.1.222 not 192.168.32.120 as it is in DC-Unlocker - ZTE Routers unlocker client v.1.0011. But for me it does not matter when there is a fault on the router and it will not accept either update or DC-Unlocker - ZTE Routers unlocker client v.1.0011.

        This is the file ISP TRE force on me: https://www.tre.se/privat/kundservic...and/ZTE-MF28G/ how ether not work at all. An a boring film of the procedure:
        Last edited by idgforum; 2014-08-09, 04:49 PM.

        Comment


        • #19
          Originally posted by idgforum View Post
          I have the file saved on Dropbox history precisely after when DC-unlock access the router by 192.168.32.1. (when it not was in 3G mode). I send it now. But I think I get up. The last I do was to change routers ip to 192.168.32.1 and then I get this but fail:

          Ping test to router (192.168.32.1)... OK
          Switching router to FTM mode... failed!
          FTM setup 1... OK
          FTM setup 2... OK
          FTM setup 3... OK
          Activating FTM mode... OK
          Waiting for router response... failed!
          Ping test to router (192.168.32.1)... OK
          Switching router to FTM mode... failed!
          FTM setup 1... OK
          FTM setup 2... OK
          FTM setup 3... OK
          Activating FTM mode... OK
          Waiting for router response... failed!
          Error code = 151
          Please contact us by live chat from web page. Then we would be able to check more.

          Comment


          • idgforum
            idgforum commented
            Editing a comment
            I don that Vincentas. But I think its some of" Swedish ISP TRE" ZTE-routers is broken . Sent in my router on warranty. When it back I gone try again with DC unlock. If I succeed with the new FW on the routers modem.
            2014-08-16
            Have not gotten back my ZTE from TRE yet and not been able to test to unlock the litle bastard
            Last edited by idgforum; 2014-08-16, 06:43 PM.

        • #20
          No luck with unlock when the routers came back (I get a new one). I don't think ZTE MF28G from TRE Sweden can be unlock.

          Comment


          • #21
            Originally posted by idgforum View Post
            No luck with unlock when the routers came back (I get a new one). I don't think ZTE MF28G from TRE Sweden can be unlock.
            When you set manually ip of network adapter to which router is connected to, try to leave gateway field empty and then proceed with detection steps, this helps for some of zte mf28 customers.
            >>Free Octohide VPN for Android, find it on Google Play Here<<

            Comment


            • #22
              Valdemaras, no luck here with the router from ISP TRE in Sweden. Now sold but I think I can unlock a future 3/4G thing with my credit.

              Comment


              • #23
                I'm having the same problem
                You do not have permission to view this gallery.
                This gallery has 2 photos.

                Comment


                • #24
                  Originally posted by sayato View Post
                  I'm having the same problem
                  If you can not unlock it directly, can go other way which is more demanding. If you have experience with devices you could disassemble router, remove module from it, connect that module to pc/notebook, install com ports that appear in device manager and unlock it via dc-unlocker client.
                  >>Free Octohide VPN for Android, find it on Google Play Here<<

                  Comment


                  • #25
                    Originally posted by Valdemaras View Post

                    If you can not unlock it directly, can go other way which is more demanding. If you have experience with devices you could disassemble router, remove module from it, connect that module to pc/notebook, install com ports that appear in device manager and unlock it via dc-unlocker client.
                    Sorry not experience with this devices

                    Comment


                    • #26
                      Help can't unlock my Zte MF75x router

                      Comment


                      • #27
                        Originally posted by Afrojac View Post
                        Help can't unlock my Zte MF75x router
                        Sorry, we do not have this one listed in our supported models.
                        >>Free Octohide VPN for Android, find it on Google Play Here<<

                        Comment


                        • #28
                          ok. But do you offer unlocking with nck, i have found where to input the nck number but it keeps on saying it's not up to 16 digit. So please help

                          Comment


                          • #29
                            Originally posted by Afrojac View Post
                            ok. But do you offer unlocking with nck, i have found where to input the nck number but it keeps on saying it's not up to 16 digit. So please help
                            No, sadly we do not have generator for it.
                            >>Free Octohide VPN for Android, find it on Google Play Here<<

                            Comment


                            • #30
                              Hm thank you

                              Comment

                              Working...
                              X