Tweet
Originally posted by 69_9000
View Post
-
Your computer runs usb activity sharing service/software therefore you got blocked. You must remove such service/software from computer before using DC-unlocker otherwise you will get blocked again. Block now removed. If you do not know what service/software on your machine causes this then can suggest only to use dc-unlocker from another pc. Note: receiving multiple blocks for same reason may end up with a permanent block.
-
Originally posted by Valdemaras View Post
I already use another pc but it does not work
My dongle InfinityBox BEST Nokia
I bought activation dc unlocker
why should be blocked?Comment
-
No new blocks on it, if you still can't log in provide us IP address from which you try to connect.Originally posted by 69_9000 View PostComment
-
After update "Huawei_E5372_WEBUI_17.100.08.00.03_general.dg tks" via Hisicon-Firmware-Writer it`s stuck on Login window.
I tried below values but faild.
User name = admin
Password = admin
What is the problem ?
Comment
-
Hello,
I have a problem with flashing the Huawei E3372 in non HiLink FW .
Can you help me ?
Only 1 modem, selected to get information
Getting information from the device...
Getting information from the device...OK
Model: E3372
Application port: COM6
Diagnostic port: --
IMEI: 869907028708929
Firmware Version: 22.200.15.02.1217
Build Date: Dec 10 2015, 21:40:32
DL Ver:2.0
DL Info:
swver:22.200.15.02.1217
isover:WEBUI_17.100.12.01.1217_HILINK
webuiver:WEBUI_17.100.12.01.1217_HILINK
product name:E3372
dload type:0
Authority Id:869907028708929,0
Authority Ver:2
User: Venmans
User credits: 11
Only 1 modem, selected to get information
Getting information from the device...
Getting information from the device...OK
Model: E3372
Application port: COM6
Diagnostic port: --
IMEI: 869907028708929
Firmware Version: 22.200.15.02.1217
Build Date: Dec 10 2015, 21:40:32
DL Ver:2.0
DL Info:
swver:22.200.15.02.1217
isover:WEBUI_17.100.12.01.1217_HILINK
webuiver:WEBUI_17.100.12.01.1217_HILINK
product name:E3372
dload type:0
Authority Id:869907028708929,0
Authority Ver:2
User: Venmans
User credits: 11
04.06.2016 12:25:34 Starting to write device...
Validating file...
File to write: C:\Users\Agando\Downloads\Huawei_E3372h_153_Firmwa re_21.180.01.00.00_SIGNED.dgtks
File version: 21.180.01.00.00
Looking for attached port...
Attached port found: COM6
Changing device to download mode...
USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1566
Instance id: 5&1c38aec2&0&6
USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 5&1c38aec2&0&6
Device has signed firmware
Device found
Preparing to write...
Device Product: HUAWEI BV7R11HS
Writing file 1 of 10...
Error downloading file 1 of 10
Error writing software
USB Device INSERTION
Type: @wmbclass_wmc_union.inf,%companyname.devicedesc%;U SB Mobile Broadband Network Adapter Module
VidPid: VID_12D1&PID_1F01
Instance id: 0123456789ABCDEF
USB Device REMOVAL
Type: @wmbclass_wmc_union.inf,%companyname.devicedesc%;U SB Mobile Broadband Network Adapter Module
VidPid: VID_12D1&PID_1F01
Instance id: 0123456789ABCDEF
USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_14DC
Instance id: 5&1c38aec2&0&6
04.06.2016 12:26:11 Writing device finished with ERROR
Switching Diagnostic ports
USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_14DC
Instance id: 5&1c38aec2&0&6
USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 5&1c38aec2&0&6
Only 1 modem, selected to get information
Getting information from the device...
Getting information from the device...OK
Model: E3372
Application port: COM13
Diagnostic port: --
IMEI: 869907028708929
Firmware Version: 22.200.15.02.1217
Build Date: Dec 10 2015, 21:40:32
DL Ver:2.0
DL Info:
swver:22.200.15.02.1217
isover:WEBUI_17.100.12.01.1217_HILINK
webuiver:WEBUI_17.100.12.01.1217_HILINK
product name:E3372
dload type:0
Authority Id:869907028708929,0
Authority Ver:2
User: Venmans
User credits: 11
04.06.2016 12:32:40 Starting to write device...
Validating file...
File to write: C:\Users\Agando\Downloads\Huawei_E3372h_153_Firmwa re_21.180.01.00.00_SIGNED.dgtks
File version: 21.180.01.00.00
Looking for attached port...
Attached port found: COM13
Changing device to download mode...
USB Device REMOVAL
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 5&1c38aec2&0&6
USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_1442
Instance id: 5&1c38aec2&0&6
Device has signed firmware
Device found
Preparing to write...
Device Product: HUAWEI BV7R11HS
Writing file 1 of 10...
Error downloading file 1 of 10
Error writing software
USB Device INSERTION
Type: @wmbclass_wmc_union.inf,%companyname.devicedesc%;U SB Mobile Broadband Network Adapter Module
VidPid: VID_12D1&PID_1F01
Instance id: 0123456789ABCDEF
USB Device REMOVAL
Type: @wmbclass_wmc_union.inf,%companyname.devicedesc%;U SB Mobile Broadband Network Adapter Module
VidPid: VID_12D1&PID_1F01
Instance id: 0123456789ABCDEF
USB Device INSERTION
Type: @usb.inf,%usb\composite.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_14DC
Instance id: 5&1c38aec2&0&6
04.06.2016 12:33:16 Writing device finished with ERRORComment
-
Sorry, we do not have information about login data.Originally posted by hafiz4saqib View PostComment
-
Then it means this device not possible to update to this firmware. Or not possible to update at all.Originally posted by V8001 View PostComment
-
Then why are you put firmware in your database, even you don't know what is the login detail ?Originally posted by Vincentas View PostComment
-
It's not a firmware, it's webui. Webui are uploaded after testing on our side only, none of the tested webuis requested any other log in details only admin/admin.Originally posted by hafiz4saqib View PostComment
-
DC - Unlocker 2 Client 1.00.1299
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Enabling Huawei modem driver... OK
Waiting for Huawei modem...
Access denied! Check firewall, antivirus, try to launch software as Administrator!
please help meComment
-
Have you done what is suggested on software? After you have checked things that were suggested let us know.Originally posted by azherahmed2003 View PostComment
-
Hi, my modem is an Huawei E3372s (unlocked) and after firmware update from 22.286.03.00.17 to 22.300.06.00.00 was unable to work (refuse to connect or to modify settings), but it still had led blue light blinking.
It refused any other update or downgrade with error code 16 (modem can't go in download mode), so after another attempt with firmware E3372s-153_Update_22.300.09.00.00_M_AT_04 it's stuck with green light blinking, Dc Unlocker cannot find it anymore, instead Huawei HiSilicon Firmware Writer detects it :
Getting information from the device...OK
Diagnostic port: COM14
DL Ver:2.0
DL Info:
swver:22.300.09.00.00
isover:WEBUI_16.100.05.00.17
product name:BV7R2HS
dload type:1
Authority Id:123456789123456,0
Authority Ver:1000
Is there a way to use this software or any other to recover my Huawei E3372s?
Comment
-
So what happens when you try to flash it with Huawei HiSilicon firmware writer.Originally posted by [-Mac-] View PostComment
-
Before to try with credits (it's 4 to flash with Huawei HiSilicon Firmware Writer, right?)Originally posted by Valdemaras View Post
I would like to know which firmware should I choose from list on support area.
My E3372s uses Hilink software so it needs a firmware with a code name like this 22.***.**.**.**
So the only one with this spec on support area is: Huawei_E3372_Firmware_22.298.03.02.965_general.dgt ks
Is the right choice?
What is the difference with SIGNED firmware like Huawei_E3372s_153_Firmware_21.300.05.00.00_SIGNED. dgtks
Also I have tried to flash with a stand alone firmware 21.300.05.00.00, something was flashed, but nothing is changed, except swver now reports 21.300.05.00.00, Huawei Hisilicon Firmware Writer detects this:
Getting information from the device...OK
Diagnostic port: COM4
DL Ver:2.0
DL Info:
swver:21.300.05.00.00
isover:WEBUI_16.100.05.00.17
product name:BV7R2HS
dload type:1
Authority Id:123456789123456,0
Authority Ver:1000Last edited by [-Mac-]; 2016-06-22, 07:04 PM.Comment
-
We won't be able to advise what firmware to flash into device for usage it is up to a person to know what firmware to flash, otherwise we do not even suggest to use the tool as you may very well damage your hardware.Originally posted by [-Mac-] View Post
The difference between SIGNED and not signed is that the first one is customized and has a signature from manufacturer, it may fit only to device's that has same signature. If your webui is not opening so you may need to update it as well.Comment
Comment