Tweet
DC-Phoenix
DC-Phoenix download software here!
Supported models and features list here
Files we have can review here Download is possible only from DC-Phoenix directly
Exclusive features :
Can write firmware by fastboot with locked bootloader and locked FRP! (latest phone firmwares may not be supported)
Huawei Firmware UPDATE.APP file direct writing in fastboot (NOT OTA files)
Full erase and write full factory images in fastboot (DC Unlocker factory images in format DGTKS)
ROM writing in fastboot without signature and compatibility checking!
Flashing bricked Huawei phones in Qualcomm 9008 mode.
Flashing bricked Huawei phones in Huawei 1.0 mode (VID_12D1&PID_3650).
Flashing bricked phones where no Huawei 1.0 or 9008 visible by testpoint
Warning
1. HCU timed license account advised
2. DC-Phoenix allows to flash any file into phone, it is not being validated by our software or by phone - be very careful what you write into your device!
SUPPORTED Models & in what conditions you can flash them
Repair only not working mobiles! If you want to downgrade security click here
Method 1:
Can be used when phone in bootloop, stuck in fastboot etc.
Can be used for region change
You should start repair attempt from this method including mobiles with Kirin980, Kirin710, Kirin810
WARNING: DO NOT USE BOARD SOFTWARE FROM OUR SUPPORT AREA FOR METHOD 1
Step 1
Use same customization files (C432 etc.) in Standard mode (Select firmware + customization (optional) + preloader (if exists), must start flashing in fastboot mode while "Rescue recovery" option on software is selected! If mobile has Kirin659 or Kirin960 cpu then put a check mark on "Old slow algo" too.
If during flashing mobile does not enter into upgrade mode (you get message) do it manually. Turn off phone, hold both vol buttons and connect device to cable, keep holding buttons until you see Huawei logo and then attempt to write same file.
IMPORTANT: Do not attempt to write APP files in fastboot without Rescue Recovery option! This will cause additional problems!
If this method did not help, read Method 2
Method 2:
For phones that do not turn on after completing Method 1 soluton
Step 1
Rewrite OEMINFO with a model, vendor, and country matching your full stock ROM file data that you want to flash into your device. For mobiles with a new version possible only via testpoint.
Step 2 (not required if Step 1 flashing is successful)
After rewriting OEMINFO you will be able to write any region's full stock firmware file in UPDATE mode once (Can do it with DC-Phoenix or from an SD card).
Select "Standard" in DC-Phoenix.
IMPORTANT:
if you want to write another file, you will need to repeat step 1.
Step 3 (required if no IMEI, sn, mac, or other data missing)
HCU repair as empty board guide HERE
Method 3:
Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990
Step 1
Full repair phone as empty board:
Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990 and with part of latest kirin970
Detailed guide here
Supported models and features list here
Files we have can review here Download is possible only from DC-Phoenix directly
Exclusive features :
Can write firmware by fastboot with locked bootloader and locked FRP! (latest phone firmwares may not be supported)
Huawei Firmware UPDATE.APP file direct writing in fastboot (NOT OTA files)
Full erase and write full factory images in fastboot (DC Unlocker factory images in format DGTKS)
ROM writing in fastboot without signature and compatibility checking!
Flashing bricked Huawei phones in Qualcomm 9008 mode.
Flashing bricked Huawei phones in Huawei 1.0 mode (VID_12D1&PID_3650).
Flashing bricked phones where no Huawei 1.0 or 9008 visible by testpoint
Warning
1. HCU timed license account advised
2. DC-Phoenix allows to flash any file into phone, it is not being validated by our software or by phone - be very careful what you write into your device!
How to repair bricked Huawei phone
SUPPORTED Models & in what conditions you can flash them
Repair only not working mobiles! If you want to downgrade security click here
Method 1:
Can be used when phone in bootloop, stuck in fastboot etc.
Can be used for region change
You should start repair attempt from this method including mobiles with Kirin980, Kirin710, Kirin810
WARNING: DO NOT USE BOARD SOFTWARE FROM OUR SUPPORT AREA FOR METHOD 1
Step 1
Use same customization files (C432 etc.) in Standard mode (Select firmware + customization (optional) + preloader (if exists), must start flashing in fastboot mode while "Rescue recovery" option on software is selected! If mobile has Kirin659 or Kirin960 cpu then put a check mark on "Old slow algo" too.
If during flashing mobile does not enter into upgrade mode (you get message) do it manually. Turn off phone, hold both vol buttons and connect device to cable, keep holding buttons until you see Huawei logo and then attempt to write same file.
IMPORTANT: Do not attempt to write APP files in fastboot without Rescue Recovery option! This will cause additional problems!
If this method did not help, read Method 2
Method 2:
For phones that do not turn on after completing Method 1 soluton
Step 1
Rewrite OEMINFO with a model, vendor, and country matching your full stock ROM file data that you want to flash into your device. For mobiles with a new version possible only via testpoint.
Step 2 (not required if Step 1 flashing is successful)
After rewriting OEMINFO you will be able to write any region's full stock firmware file in UPDATE mode once (Can do it with DC-Phoenix or from an SD card).
Select "Standard" in DC-Phoenix.
IMPORTANT:
if you want to write another file, you will need to repeat step 1.
Step 3 (required if no IMEI, sn, mac, or other data missing)
HCU repair as empty board guide HERE
Method 3:
Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990
Step 1
Full repair phone as empty board:
Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990 and with part of latest kirin970
Detailed guide here
Comment