ZTE MF90 4G not supported

[Scribbie]

Yes, thats what i meant. Now try to paste this http://192.168.0.1/mode_switch.asp address into browser and hit enter, does anything happen, any extra window appears with options to choose on your side?

No, I get an "Access Error: Site or Page Not Found" :/

[Valdemaras]

Well I access the web ui through 192.168.0.1

that's what you meant right?

Yes, thats what i meant. Now try to paste this http://192.168.0.1/mode_switch.asp address into browser and hit enter, does anything happen, any extra window appears with options to choose on your side?

[Scribbie]

Lets try one more thing then. Access MF90 web panel and let us know address by which you access it, then we will check for further possible steps to take to detect your device.

Well I access the web ui through 192.168.0.1

that's what you meant right?

[Valdemaras]

I admire your commitment to trying to help us all out in here.. so, thank you.

I tried it on two different devices which also run on different Windows versions (7 and XP). The result was identical.

I did notice something though. I kept the Device Manager window up and observed it as I attached the device. While the computer was detecting it, I did notice an "other devices" entity appear only very very briefly.. for like less than a second. and then it disappears which is when the other "hardware" appear: the Disk drive MMC storage device, the portable device drive, the CD ROM drive, and the usb mass storage drive.....

Lets try one more thing then. Access MF90 web panel and let us know address by which you access it, then we will check for further possible steps to take to detect your device.

[Scribbie]

Its not visible from this size screenshot, you should attempt to detect your device on another pc and check if it is recognized same way in device manager.

I admire your commitment to trying to help us all out in here.. so, thank you.

I tried it on two different devices which also run on different Windows versions (7 and XP). The result was identical.

I did notice something though. I kept the Device Manager window up and observed it as I attached the device. While the computer was detecting it, I did notice an "other devices" entity appear only very very briefly.. for like less than a second. and then it disappears which is when the other "hardware" appear: the Disk drive MMC storage device, the portable device drive, the CD ROM drive, and the usb mass storage drive.....

[Valdemaras]

Nothing changed.. same issue remains with no change whatsoever.

Here it even shows how the computer is dealing with the device and what sort of hardware is being detected:



Those are exactly what I find within the device manager and nothing else...

Its not visible from this size screenshot, you should attempt to detect your device on another pc and check if it is recognized same way in device manager.

[Scribbie]

Please try this - uninstall that software that you had installed before for your device from devices drive/cdrom

Then reconnect mf90 to pc, go to computer area and eject drive/cdrom of your device that should appear there again after uninstalling software.

Then go to device manager and see if anything popped up related your device.

Nothing changed.. same issue remains with no change whatsoever.

Here it even shows how the computer is dealing with the device and what sort of hardware is being detected:



Those are exactly what I find within the device manager and nothing else...

[Valdemaras]

Thank you for the reply.

I tried all that.. tried everything I could possibly think of.. and nothing. No change.. the only ZTE I see in the device manager, as I mentioned before, is listed under Disk drives as "ZTE MMC Storage USB Device". and a "USB Mass Storage Device" pops under USB Controllers whenever the device is attached.

I have those files you linked me to downloaded... but I can see no use for them as I cannot let the laptop detect the modem properly and list it at least under Other Devices so I can update the drivers manually...

Feel like I'm in a loop..

Please try this - uninstall that software that you had installed before for your device from devices drive/cdrom

Then reconnect mf90 to pc, go to computer area and eject drive/cdrom of your device that should appear there again after uninstalling software.

Then go to device manager and see if anything popped up related your device.

[Scribbie]

Necessary drivers are in our support area website https://www.dc-unlocker.com/file-list/ try to disable device from under usb drivers, see if anythign happens, try to eject drive of modem from computer area.

Thank you for the reply.

I tried all that.. tried everything I could possibly think of.. and nothing. No change.. the only ZTE I see in the device manager, as I mentioned before, is listed under Disk drives as "ZTE MMC Storage USB Device". and a "USB Mass Storage Device" pops under USB Controllers whenever the device is attached.

I have those files you linked me to downloaded... but I can see no use for them as I cannot let the laptop detect the modem properly and list it at least under Other Devices so I can update the drivers manually...

Feel like I'm in a loop..

[Valdemaras]

Guys I need your urgent and thorough help here please..

I connected the device to my laptop.. and it would not be detected as a modem. The computer only detects it as a usb storage device.

There is nothing at all under "Other Devices" in Device Manager as I keep seeing in several other posts and as it should be. Nothing at all under Ports (COM).

If I try to run the autoplay file on the virtual CD ROM that is supposed to install all necessary files and drivers, nothing changes. Yes the network center shows a connected Speed 4G device, connected through LAN and I can use it to access the internet. But nothing at all changes regarding device detection.

What should I do? What am I supposed to do so I can successfully allow the laptop to properly detect the device??

Necessary drivers are in our support area website https://www.dc-unlocker.com/file-list/ try to disable device from under usb drivers, see if anythign happens, try to eject drive of modem from computer area.

[Scribbie]

Need Help...

Guys I need your urgent and thorough help here please..

I connected the device to my laptop.. and it would not be detected as a modem. The computer only detects it as a usb storage device.

There is nothing at all under "Other Devices" in Device Manager as I keep seeing in several other posts and as it should be. Nothing at all under Ports (COM).

If I try to run the autoplay file on the virtual CD ROM that is supposed to install all necessary files and drivers, nothing changes. Yes the network center shows a connected Speed 4G device, connected through LAN and I can use it to access the internet. But nothing at all changes regarding device detection.

What should I do? What am I supposed to do so I can successfully allow the laptop to properly detect the device??

[Valdemaras]

the reset option from with in the modem's admin page fixed the problem !

is there any way to obtain the original firmware ?

Original firmware of the device is usually available from the operator's web site that device was locked to.

[abo-sultan]

the reset option from with in the modem's admin page fixed the problem !

is there any way to obtain the original firmware ?

[Valdemaras]

No i am just asking


putty opens console when connected to com port with a command prompt but dose not accept any inputs !

This problem should be possible to solve without flashing device. Its same situation by Hyperterminal software as well?

[abo-sultan]

What do you mean, you have changed firmware of it?

No i am just asking

If disabling diagnostics port did not help that way you might want to try hyperterminal software and try to disable this port from it.

putty opens console when connected to com port with a command prompt but dose not accept any inputs !