DC-Phoenix

[Valdemaras]

Then you should do method 2. After you try it let me know.

[hafiz4saqib]

Then you should do method 2. After you try it let me know.

First of all, Sorry for miss behaviors!!!
I paid to you for work not for play .....

I already don with "Method 1" & "Method 2" with & without below image.
MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Non specific_Android_7.0_EMUI_5.0.dgtks

But problem is there same like as before ..... Can`t write firmware ...... in "upgrade mode"
I tried all types of firmware's but wont work as "Method 1" or "Method 2", Even I tried with & without unchecked "Erase NV" & "Erase oemInfo" ...

Firmware are :-
1:- MHA-L29C185B158-Full
2:- MHA-L29C432B156-Full
3:- MHA-L29C185B172_OTA
4:- MHA-L29C636B158-Full
5:- MHA-L29BC10B156-Full
6:- MHA-L29C636B136-Full

I think that this is"beyond of yours imaginations"

[Valdemaras]

What you need to do is to flash factory firmware, then flash your update.app in fastboot and only then flash update.app in upgrade mode and if in upgrade mode flashing does not work can do it from sd card as it is same thing.

[hafiz4saqib]

What you need to do is to flash factory firmware, then flash your update.app in fastboot and only then flash update.app in upgrade mode and if in upgrade mode flashing does not work can do it from sd card as it is same thing.

Sorry for not explain to you in detail.
My steps are below and guide me here ...
1:- I flash factory image
MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Non specific_Android_7.0_EMUI_5.0.dgtks

2:- I flash the UPDATE.APP in "Fastboot mode"( MHA-L29C185B158-Full )
3:- I flash again same version in "Upgrade Mode" but it`s won`t write at this point. not this only firmware but every firmware has same error on the same point.

Cant`t write even from SD CARD.

Could you guide me about "Force update" ?????

[Valdemaras]

Sorry for not explain to you in detail.
My steps are below and guide me here ...
1:- I flash factory image
MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Non specific_Android_7.0_EMUI_5.0.dgtks

2:- I flash the UPDATE.APP in "Fastboot mode"( MHA-L29C185B158-Full )
3:- I flash again same version in "Upgrade Mode" but it`s won`t write at this point. not this only firmware but every firmware has same error on the same point.

Cant`t write even from SD CARD.

Could you guide me about "Force update" ?????

Force upgrade possible only if you know testpoints of your phone to short-circuit it. After flashing in fastboot with update.app try clear cache/wipe data and only then try flashing in upgrade mode or from sd card. Otherwise your phone may be damaged on hardware level.

[Miss Montage]

I need to nag a little bit. After a messed up rollback from Android 7 Beta to Marshmallow (Huawei P9 Lite: B336 -> B300 -> B160) I had to revert to method 2. Although I didn't uncheck the boxes for NV and OEMinfo my Serial Number was deleted. I have full backups all partitions, but now the bootloader unlock isn't recognized properly -> I cannot flash a custom recovery to write my backup files to the phone. So I will have to use my mother's Windows Computer on Easter in order to install HCU client and pay another 8 EUR. I'm running Linux, and HCU Client will not run in a virtual machine.
Also the Upgrade Step with DC Phoenix took about 20 hours and failed at the last partition (Cust). Is that usual?

[Valdemaras]

I need to nag a little bit. After a messed up rollback from Android 7 Beta to Marshmallow (Huawei P9 Lite: B336 -> B300 -> B160) I had to revert to method 2. Although I didn't uncheck the boxes for NV and OEMinfo my Serial Number was deleted. I have full backups all partitions, but now the bootloader unlock isn't recognized properly -> I cannot flash a custom recovery to write my backup files to the phone. So I will have to use my mother's Windows Computer on Easter in order to install HCU client and pay another 8 EUR. I'm running Linux, and HCU Client will not run in a virtual machine.
Also the Upgrade Step with DC Phoenix took about 20 hours and failed at the last partition (Cust). Is that usual?

If upgrade does not happen in 20 minutes you can cancel it, it definitely won't go through. Your Sn possible to be missing if used method 2.

[089999945]

Y6 SCC-U21 write in completed too after phone still hang on logo and can't enter to upgrade mode

OEMSBL version: SCC-U21C900B130CUSTC636D001_BOOT
AMSS version: SCC-U21C900B130CUSTC636D001
Extracting partitions
Cannot create extract directory: D:\Soft Box\Dc Unlocker\DC_Phoenix\tmp\20170419_172539_UPDATE\
Extract files to directory: D:\Soft Box\Dc Unlocker\DC_Phoenix\
Extracting partition: RPM OK
Extracting partition: TZ OK
Extracting partition: SBL1 OK
Extracting partition: MODEM OK
Extracting partition: MODEMST1 OK
Extracting partition: MODEMST2 OK
Extracting partition: FSG OK
Extracting partition: LOGO OK
Extracting partition: ABOOT OK
Extracting partition: RECOVERY OK
Extracting partition: ERECOVERY OK
Extracting partition: SYSTEM OK
Extracting partition: USERDATA OK
Extracting partition: CACHE OK
Extracting partition: CUST OK
Extracting partition: PERSIST OK
Extracting partition: BOOT OK

Device found: 479050c2

SN: MJ7N15B14001406
Build number: SCC-U21C900B130
Product model: HUAWEI SCC-U21

Writing RPM partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\RPM.img
RPM partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE

Writing RPM partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\RPM.img
RPM partition UPDATE ...OK

Writing TZ partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\TZ.img
TZ partition UPDATE ...OK

Writing SBL1 partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\SBL1.img
SBL1 partition UPDATE ...OK

Writing MODEM partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\MODEM.img
MODEM partition UPDATE ...OK

Writing MODEMST1 partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\MODEMST1.img
MODEMST1 partition UPDATE ...OK

Writing MODEMST2 partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\MODEMST2.img
MODEMST2 partition UPDATE ...OK

Writing FSG partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\FSG.img
FSG partition UPDATE ...OK

Writing LOGO partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\LOGO.img
LOGO partition UPDATE ...FAILED

Writing ABOOT partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\ABOOT.img
ABOOT partition UPDATE ...OK

Writing RECOVERY partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\RECOVERY.img
RECOVERY partition UPDATE ...OK

Writing ERECOVERY partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\ERECOVERY.img
ERECOVERY partition UPDATE ...OK

Writing SYSTEM partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...OK

Erasing USERDATA partition
Partition USERDATA erased

Writing USERDATA partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\USERDATA.img
USERDATA partition UPDATE ...OK

Erasing CACHE partition
Partition CACHE erased

Writing CACHE partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\CACHE.img
CACHE partition UPDATE ...OK

Erasing CUST partition
Partition CUST erased

Writing CUST partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\CUST.img
CUST partition UPDATE ...OK

Writing PERSIST partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\PERSIST.img
PERSIST partition UPDATE ...OK

Writing BOOT partition with file D:\Soft Box\Dc Unlocker\DC_Phoenix\BOOT.img
BOOT partition UPDATE ...OK
Software written
4/19/2017 5:29:35 PM Writing device finished - INCOMPLETE

Im very try still show Writing device finished - INCOMPLETE.
Pls help me supporter.

[089999945]

im try force Upgrade done but phone still can't enter upgrade mode or by MMC

4/20/2017 6:26:55 PMStarting process

Device detected:
COM40: Qualcomm HS-USB QDLoader 9008 (COM40)
Writing MPRG...OK...

Updating partition sbl1 ...
Writing sbl1.mbn...OK

Updating partition sec ...
Writing sec.dat...OK

Updating partition rpm ...
Writing rpm.mbn...OK

Updating partition tz ...
Writing tz.mbn...OK

Updating partition aboot ...
Writing emmc_appsboot.mbn...OK

Updating partition modemst1 ...
Writing modem_st1.mbn...OK

Updating partition modemst2 ...
Writing modem_st2.mbn...OK

Updating partition fsg ...
Writing fs_image.tar.gz.mbn.img...OK

Updating partition modem ...
Writing NON-HLOS.bin...OK

Updating partition persist ...
Writing persist_1.img...OK

Updating partition log ...
Writing log.img...OK

Updating partition boot ...
Writing boot.img...OK

Updating partition recovery ...
Writing recovery.img...OK

Updating partition cache ...
Writing cache_1.img...OK

Updating partition cust ...
Writing cust_1.img...OK

Updating partition system ...
Writing system_1.img...OK

Updating partition userdata ...
Writing userdata_1.img...OK
Writing userdata_2.img...OK
Writing userdata_3.img...OK
Writing userdata_4.img...OK
Writing userdata_5.img...OK
Writing userdata_6.img...OK
Writing userdata_7.img...OK
Writing userdata_8.img...OK
Writing userdata_9.img...OK
Writing userdata_10.img...OK
Writing userdata_11.img...OK
Writing userdata_12.img...OK
Writing userdata_13.img...OK
Writing userdata_14.img...OK
Writing userdata_15.img...OK

Updating partition system ...
Writing system_2.img...OK
Writing system_3.img...OK
Writing system_4.img...OK
Writing system_5.img...OK
Writing system_6.img...OK
Writing system_7.img...OK
Writing system_8.img...OK
Writing system_9.img...OK
Writing system_10.img...OK
Writing system_11.img...OK
Writing system_12.img...OK
Writing system_13.img...OK
Writing system_14.img...OK
Writing system_15.img...OK
Writing system_16.img...OK
Writing system_17.img...OK
Writing system_18.img...OK
Writing system_19.img...OK
Writing system_20.img...OK
Writing system_21.img...OK
Writing system_22.img...OK
Writing system_23.img...OK
Writing system_24.img...OK
Writing system_25.img...OK
Writing system_26.img...OK
Writing system_27.img...OK
Writing system_28.img...OK
Writing system_29.img...OK
Writing system_30.img...OK

Updating partition cust ...
Writing cust_2.img...OK
Writing cust_3.img...OK
Writing cust_4.img...OK

Updating partition cache ...
Writing cache_2.img...OK
Writing cache_3.img...OK

Updating partition erecovery ...
Writing erecovery.img...OK

Updating partition PrimaryGPT ...
Writing gpt_main0.bin...OK

Updating partition BackupGPT ...
Writing gpt_backup0.bin...OK

Update last partition 25 'userdata' with actual size in Primary Header....OK

Update last partition 25 'userdata' with actual size in Backup Header....OK

Update Primary Header with LastUseableLBA....OK

Update Backup Header with LastUseableLBA....OK

Update Primary Header with BackupGPT Header Location....OK

Update Backup Header with CurrentLBA....OK

Update Backup Header with Partition Array Location....OK

Update Primary Header with CRC of Partition Array....OK

Update Backup Header with CRC of Partition Array....OK

Zero Out Header CRC in Primary Header....OK

Update Primary Header with CRC of Primary Header....OK

Zero Out Header CRC in Backup Header....OK

Update Backup Header with CRC of Backup Header....OK

Software written

4/20/2017 6:35:45 PM Writing device finished OK

[Valdemaras]

If device does not revive after flashing it with factory firmware then there is really no solution for your phone but board replacement.

[plikmuny]

is there a stock fastboot firmware available for honor 6 H60-L02 ? also which version of DC-Unlocker software should i use ?
can you tell me how can i determine the support for my model and how much credit i needed and also the necessary files to restore my honor 6 ?

[Miss Montage]

This is the most recent firmware I could find for your device: http://ministryofsolutions.com/2016/...-firmware.html
H60-L02 is in the list of supported devices: https://www.dc-unlocker.com/supportedmodelsdcpx.php, but there is no factory firmware file available in case you need to proceed with method 2. (as in opening post here). You need 15 points...

[mhmmd.nq]

Hi,

My phone is Honor 5c NEM-L22. My phone just can boot only into bootloader because I've f*cked up flashing roms and recovery (if you need more details on this i can elaborate more).

1) I bought 8 credits from you, tried method 1, step 1, using Honor 5c NEM-L22 Firmware B150 (NEM-L22C636B150) asia firmware. and it's extracting, and says cannot get IMEI from device and it says not enough credit, (sorry forgot to copy the whole log)

2) Then i tried method 2, step 1, using "KIW-L21_C900B076_Factory_firmware_Nonspecific_Android5 .1.1_EMUI_3.1.dgtks". This is the log:

"The file was loaded successfully

Device found: HHS4C16628005735

Cannot get IMEI from device
Build number: :NEM-C900B140
Product model: hi6250
Not enough credits"

What happen? I thought I have 8 credits? Your website says for Honor 5c it needs 4 credits to flash. How is it the first time I flash it it says i dont have enough credits?

My username for the paid username is mhmmdnq87

Please help.

[Valdemaras]

Using DC-phoenix requires 15 credits.

[mhmmd.nq]

I see, so now i have to buy 7 more credits right?

EDIT: Just want to let you guys know that I have successfully restore my bricked Honor 5C using DC-Phoenix. Following instruction exactly as tutorials. Thank you. Superb tool