DC-Phoenix

[Valdemaras]

First try to uninstall mobile and then reinstall hisuite on pc for correct drivers. After flashing board phone does not boot up normally as i understand, is that correct?

[hinterland99]

Hello
Mediapad m5 Wifi model
cmr-w09
im desperate after 35 hours of trying(no Exaggeration) can DC Phoenix help?


I partly succesfully downgraded from emui 9 for dc bootloader unlocker to work -------- via testpoint method (tablet is opened)
flashing board software in edl mode(edl and fastboot)

My Problem - pls help
whenever i boot the tablet boots into edl mode --- without having the test point pressed
no fastboot --- via vol down button
no emregency rescue----- via vol up button
just the edl mode :

-----------------------------------------------------------------
Manufacturer: HISILICON

GSM modem (1-port) converter detected
usb 3-3: GSM modem (1-port) converter now attached to ttyUSB0
------------------------------------------------------------------------------------

BUT i get a full working fastboot with HiKey_IDT tools --> stable

-------------------------------------------------------------------------
C:\adb\Minimal ADB and Fastboot>fastboot devices
0123456789ABCDEF fastboot

C:\adb\Minimal ADB and Fastboot>
-----------------------------------------------------------

fastboot.jpg

whenever i disconnect the usb cable and reboot i get a black screen on Tablet and "land" in edl mode(not edl fastboot)

do i have am expensive doorstoper? or is there hope?

[Vincentas]

Can you help me with an account? I need it urgently. My cell phone died and I need to revive it. I only want the account for about three hours and you can change the password, please!

Please read my previous message.

[juanN12]

Can you help me with an account? I need it urgently. My cell phone died and I need to revive it. I only want the account for about three hours and you can change the password, please!

[Vincentas]

no puedo usar el software
pongo usuario y contraseña

How to receive username and password you can find here: https://www.dc-unlocker.com/how-to-g...rname-password

[juanN12]

no puedo usar el software
pongo usuario y contraseña

[Krzysztof GorÄ…czko]

Does anyone have a file oeminfo, when I choose in dc-Phoenix Sne-lx1 uploads me oeminfo but I have a version of 1 simowa, and i get hot second imei 000000000000000

[trekelectronics]

Thanks for methods of "How to repair bricked Huawei phone".

[Valdemaras]

Hola, me sale este error

Try on this version https://files.dc-unlocker.com/get/60...102872e8f6e3e4

[gsmgeo]

Hola, me sale este error

Check Dc Phoenix Old version
118 or 115

[nono90]

Hola, me sale este error

[Betamaxi]

Hi, if you want downgrade in order to get the unlock code you need to do the following.
Via HiSuite downgrade to 8.0 android
Use Update mode and flash 108 firmware
After that you can get the code

My ANE-LX1 is capable to run only fastboot and stock recovery. I can't flash TWRP recovery.

I only want to unbrick them. Can you help about needed filed, program and credits.

[gsmgeo]

Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: 9WV4C18B09027252

Build number: :ANE-LX1 9.1.0.306(C432E6R1P7)
Model: ANE-LX1
Vendor/Country: Vendor/Country: hw/eu
Battery state: 3687mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

I'm stuck in bootloader or recovery (TWRP without buttons), I'm trying to flash Anne-L21_8.0.0.108(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0.APP, but the program DC-Phoenix 0.0.0.118 say "Not Enough credits".

How much I need? I'm 4 credits.

Thanks in advance.

Hi, if you want downgrade in order to get the unlock code you need to do the following.
Via HiSuite downgrade to 8.0 android
Use Update mode and flash 108 firmware
After that you can get the code

[Betamaxi]

Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: 9WV4C18B09027252

Build number: :ANE-LX1 9.1.0.306(C432E6R1P7)
Model: ANE-LX1
Vendor/Country: Vendor/Country: hw/eu
Battery state: 3687mv
OEM lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

I'm stuck in bootloader or recovery (TWRP without buttons), I'm trying to flash Anne-L21_8.0.0.108(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0.APP, but the program DC-Phoenix 0.0.0.118 say "Not Enough credits".

How much I need? I'm 4 credits.

Thanks in advance.

[Valdemaras]

DC Phoenix 0.0.0.118
user:bl18962

Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: SSR9X18623G02029


2/26/2020 9:47:57 PM Starting to write device in FASTBOOT mode...
File size: 3,640,980,180 bytes
AMSS version: AUM-L29 8.0.0.140(C900)


Looking for a device in fastboot mode
Device found: SSR9X18623G02029


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:SSR9X18623G02029
IMEI:868720030162568
Build number: AUM-L29 8.0.0.168(C636)
Model: AUM-L29
Vendor/Country: Vendor/Country: hw/spcseas
Battery state: 3779mv
OEM lock state info:
user Lock state is unlock

fbLock state is lock

OEM get bootinfo:
*******************************************

Image is origin

Verify mode is enforcing

Check root info is safe

Lock state is unlock

Root State: ROOT

*******************************************



Process identifier:23100642


Erasing ver .. .
Cannot get FBlock info from device
Trying to unlock device...

Signing process may take few minutes

Trying to get data from server
Unlock process finished successfully


Erasing ver .. .

Writing RPM partition
RPM partition update ...OK

Writing TZ partition
TZ partition update ...OK

Writing SBL1 partition
SBL1 partition update ...OK

Writing APDP partition
APDP partition update ...OK

Writing MSADP partition
MSADP partition update ...OK

Writing MODEM partition
MODEM partition update ...OK

Writing DSP partition
DSP partition update ...OK

Writing CMNLIB partition
CMNLIB partition update ...OK

Writing KEYMASTER partition
KEYMASTER partition update ...OK

Writing CMNLIB64 partition
CMNLIB64 partition update ...OK

Writing DEVCFG partition
DEVCFG partition update ...OK

Writing LKSECAPP partition
LKSECAPP partition update ...OK

Writing ABOOT partition
ABOOT partition update ...OK

Writing KERNEL partition
KERNEL partition update ...OK

Writing RAMDISK partition
RAMDISK partition update ...OK

Writing RECOVERY_RAMDISK partition
RECOVERY_RAMDISK partition update ...OK

Writing RECOVERY_VENDOR partition
RECOVERY_VENDOR partition update ...OK

Writing ERECOVERY_KERNEL partition
ERECOVERY_KERNEL partition update ...OK

Writing ERECOVERY_RAMDISK partition
ERECOVERY_RAMDISK partition update ...OK

Writing ERECOVERY_VENDOR partition
ERECOVERY_VENDOR partition update ...OK

Erasing SYSTEM partition
Partition SYSTEM erased
Writing SYSTEM partition
sending sparse file 456407196 bytes
Waiting for answer...
send sparse file OK
sending sparse file 527367664 bytes
Waiting for answer...
send sparse file OK
sending sparse file 527779768 bytes
Waiting for answer...
send sparse file OK
sending sparse file 531995192 bytes
Waiting for answer...
send sparse file OK
sending sparse file 532211368 bytes
Waiting for answer...
send sparse file OK
sending sparse file 58421636 bytes
Waiting for answer...
send sparse file OK
SYSTEM partition update ...OK

Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition
CACHE partition update ...OK

Erasing ODM partition
Partition ODM erased
Writing ODM partition
ODM partition update ...OK
Software written
2/26/2020 9:51:04 PM Writing device finished OK

Waiting for fastboot device...

USB Device REMOVAL
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: SSR9X18623G02029

Device found: SSR9X18623G02029

File size: 3,640,980,180 bytes

USB Device INSERTION
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: SSR9X18623G02029

AMSS version: AUM-L29 8.0.0.140(C900)
Writing rescue_recovery_kernel partition
RESCUE_RECOVERY_KERNEL partition update ...OK
Writing rescue_recovery_ramdisk partition
RESCUE_RECOVERY_RAMDISK partition update ...OK
Writing rescue_recovery_vendor partition
RESCUE_RECOVERY_VENDOR partition update ...OK

USB Device REMOVAL
Type: @oem66.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: SSR9X18623G02029


USB Device INSERTION
Type: @oem72.inf,%busfilter.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_107D
Instance id: SSR9X18623G02029

Looking for device in upgrade mode...
COM3: Android Adapter PCUI (COM3)

2/26/2020 9:54:47 PM Starting to write device in UPGRADE mode...
No devices detected in fastboot mode
Old slow algo NOT selected

2/26/2020 9:54:48 PM start to write update file
File to update: C:\Users\Acer\Downloads\SHAREit\SM-G950F\file\UPDATE.APP
File size: 3,640,980,180 bytes
AMSS version: AUM-L29 8.0.0.140(C900)

Process identifier:23100818

Validating file...
Looking for attached port...
Preparing to write...
Writing file 1 of 31: SHA256RSA...OK
Writing file 2 of 31: CRC...OK
Writing file 3 of 31: AMSS_VERLIST...
Error downloading file 3 of 31

Error writing software
2/26/2020 9:54:59 PM Writing device finished with ERROR






HELP ME!

File you are using does not match version that is in device.