DC-Phoenix

[nieldk]

Your problem is not the same, you just need to do what i wrote to overcome it. There is nothing else from us to try, you need correct firmware file and use either method b or c from enable testpoint guide.

Hmm ok, would a firmware file for the dload sdcard upgrade method work?

[cellenser]

We will contact you via email linked to your account when there are news if that's okay.

That would be awesome, yes!

[Valdemaras]

I would like to continue trying.
So, when you have something for me to try, i will like the license extended

Your problem is not the same, you just need to do what i wrote to overcome it. There is nothing else from us to try, you need correct firmware file and use either method b or c from enable testpoint guide.

[Valdemaras]

Thank you!
Let me know if you need any more information about my Phone (ELE-L29, Huawei P30).
Hopefully you're able to find a solution for that.

We will contact you via email linked to your account when there are news if that's okay.

[cellenser]

There is no information available for how long it may take to check problem/find solution. Refund for timed license now completed.

Thank you!
Let me know if you need any more information about my Phone (ELE-L29, Huawei P30).
Hopefully you're able to find a solution for that.

[nieldk]

There is no information available for how long it may take to check problem/find solution. Refund for timed license now completed.

I would like to continue trying.
So, when you have something for me to try, i will like the license extended

[Valdemaras]

Account freeze wouldn't be the best idea, I guess. It states it works for only 5 more hours. That means I've wasted ~2days and 19hours without getting any positive results :S


Here's another log from the DC-Phoenix after repeating the tutorial a few times and hitting "Read Info".

DC Phoenix 0.0.0.153
user:cellenser

Device detected:
COM18: HUAWEI USB COM 1.0 (COM18)
BOOTLOADER File to update: Kirin980_P1_V1
29.01.2021 12:09:40 Starting to write device...

Process identifier:29884671


Writing bootloader...
Step 2...
Step 3...
Step 4...
Step 5...
Step 6...

Waiting for device REMOVAL/INSERTION...

Waiting for fastboot device...

USB Device REMOVAL
Type: @oem26.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&1e7d8db7&0&12

USB Device INSERTION
Type: @oem12.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&1e7d8db7&0&12
Device found: XPH0220409001270


Looking for a device in fastboot mode
Device found: XPH0220409001270


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

Build number: :ELE-L29 10.0.0.195(C431E22R2P5)
Model: ELE-L29
Vendor/Country: hw/eea
Battery state: 0
OEM lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

Getting lock state info...
Cannot get FBlock info from device
Cannot get HW FBlock info from device
Trying to unlock device...

Signing process may take few minutes

Trying to get data from server

Looking for a device in fastboot mode
Device found: XPH0220409001270


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:XPH0220409001270
IMEI:865584044243415
IMEI1:865584044256433
MEID:A00000B5EEF14A
Build number: :ELE-L29 10.0.0.195(C431E22R2P5)
Model: ELE-L29
Vendor/Country: hw/eea
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

29.01.2021 12:10:43 Process finished OK

Not sure but it seems USER LockState stays at "UNLOCKED" now.
OEM get bootinfo also shows "unlocked".

FB LockState seems to lock itself after reboot, even when using "Unlock FRP by Testpoint". The other method (Unlock FRP in Update or FB Mode) doesn't work.

Tried to unlock the FRP in HCU in testpoint-fastboot mode, which gave me "2021-01-29 11:41:25.679 Write FBLOCK for this model not supported, skipped!"


Could you extend my license until we got everything to work?
I'd really appreciate it!

There is no information available for how long it may take to check problem/find solution. Refund for timed license now completed.

[cellenser]

Code not available for p30 only direct unlock - what you did. We are currently checking the problem you described on our side, for time being will do a refund of your purchase or can freeze account until there is more info about it and extend license afterwards. Please let us know.

Account freeze wouldn't be the best idea, I guess. It states it works for only 5 more hours. That means I've wasted ~2days and 19hours without getting any positive results :S


Here's another log from the DC-Phoenix after repeating the tutorial a few times and hitting "Read Info".

DC Phoenix 0.0.0.153
user:cellenser

Device detected:
COM18: HUAWEI USB COM 1.0 (COM18)
BOOTLOADER File to update: Kirin980_P1_V1
29.01.2021 12:09:40 Starting to write device...

Process identifier:29884671


Writing bootloader...
Step 2...
Step 3...
Step 4...
Step 5...
Step 6...

Waiting for device REMOVAL/INSERTION...

Waiting for fastboot device...

USB Device REMOVAL
Type: @oem26.inf,%qcomdevice00%;HUAWEI USB COM 1.0
VidPid: VID_12D1&PID_3609
Instance id: 5&1e7d8db7&0&12

USB Device INSERTION
Type: @oem12.inf,%hwfastboot%;Android Sooner Single ADB Interface
VidPid: VID_18D1&PID_D00D
Instance id: 5&1e7d8db7&0&12
Device found: XPH0220409001270


Looking for a device in fastboot mode
Device found: XPH0220409001270


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

Build number: :ELE-L29 10.0.0.195(C431E22R2P5)
Model: ELE-L29
Vendor/Country: hw/eea
Battery state: 0
OEM lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

Getting lock state info...
Cannot get FBlock info from device
Cannot get HW FBlock info from device
Trying to unlock device...

Signing process may take few minutes

Trying to get data from server

Looking for a device in fastboot mode
Device found: XPH0220409001270


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:XPH0220409001270
IMEI:865584044243415
IMEI1:865584044256433
MEID:A00000B5EEF14A
Build number: :ELE-L29 10.0.0.195(C431E22R2P5)
Model: ELE-L29
Vendor/Country: hw/eea
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: UNLOCKED
OEM get bootinfo:
unlocked

29.01.2021 12:10:43 Process finished OK

Not sure but it seems USER LockState stays at "UNLOCKED" now.
OEM get bootinfo also shows "unlocked".

FB LockState seems to lock itself after reboot, even when using "Unlock FRP by Testpoint". The other method (Unlock FRP in Update or FB Mode) doesn't work.

Tried to unlock the FRP in HCU in testpoint-fastboot mode, which gave me "2021-01-29 11:41:25.679 Write FBLOCK for this model not supported, skipped!"


Could you extend my license until we got everything to work?
I'd really appreciate it!

[Valdemaras]

But where do I get the Bootloader Code for my P30?
Huawei is not giving out any bootloader codes anymore.


Switching back to DC-Phoenix, I disabled the software tespoint.
Now when I start my phone into bootloader-mode (adb reboot bootloader), it still shows PHONE and FRP as Locked...

Any idea?

Also @Admins, could you please extend my license until we've figured out how to get it to work finally?

Code not available for p30 only direct unlock - what you did. We are currently checking the problem you described on our side, for time being will do a refund of your purchase or can freeze account until there is more info about it and extend license afterwards. Please let us know.

[Valdemaras]

Hi Valdemaras, and thanks for answering, But, My Android version is 10.0 not 10.1

Base Version:SNE-LGRP2-OVS 10.0.0.272 Cust Version:SNE-LX1-CUST 10.0.0.11(C432) Preload Version:SNE-LX1-PRELOAD 10.0.0.1(C432R1)

Still, it fails with error

Error downloading file ENABLE_TESTPOINT_2.dtwork, partition: BASE_VERLIST

What firmware are you selecting, have you tried as advised in guide to put check mark below selection firmware field depending on situation?

[cellenser]

If you read the code . You should be able to boot the phone to fastboot, and then in commandprompt use “fastboot oem unlock (your code)
enable OEM unlock and ADB Debug in settings first

But where do I get the Bootloader Code for my P30?
Huawei is not giving out any bootloader codes anymore.

EDIT:
Followed this tutorial: https://hcu-client.com/huawei-bootlo...via-testpoint/
I put the Phone into Software Testpoint mode and use the Fastboot/Xloader Rerpair mode to set "Bootloader lock" and "FBLOCK" to unlocked.
Also checking the "Reboot after Repair" and hitting "Repair".

This pops up:

2021-01-29 11:41:25.254 Repairing...
2021-01-29 11:41:25.679 Write FBLOCK for this model not supported, skipped!
2021-01-29 11:41:25.688 Write partition oeminfo...
2021-01-29 11:41:28.598 Write partition oeminfo success!
2021-01-29 11:41:28.617 Unlocking restrictions...
2021-01-29 11:41:28.677 Unlock restrictions success!
2021-01-29 11:41:28.683 Rebooting...
2021-01-29 11:41:28.704 Reboot success!
2021-01-29 11:41:28.712 Done!

After hitting "Read phone info" again, it shows me (as expected?):

FBLOCK: 1
Bootloader FB lock: unlocked
Bootloader User lock: unlocked

Switching back to DC-Phoenix, I disabled the software tespoint.
Now when I start my phone into bootloader-mode (adb reboot bootloader), it still shows PHONE and FRP as Locked...

Any idea?

Also @Admins, could you please extend my license until we've figured out how to get it to work finally?

[nieldk]

I just downloaded a Stock firmware from somewhere on the internet (not the ones you can download via Firmware Finder.
And it worked.


So, how do I proceed to unlock the bootloader permanently?
I've used DCPhoenix to activate testpoint and unlocked the bootloader temporarily.
After that, I tried to unlock it via fastboot flashing unlock (FAILED (remote: check password failed!)).

I also tried to unlock it via HCU and DC-Unlocker which didn't seem to work.

Is there a tutorial which steps I have to do to unlock the bootloader permanently on my device?

DC-Unlocker Log:

================================================== =================

DC - Unlocker 2 Client 1.00.1431

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : ELE-L29
Model : Huawei phone in fastboot mode
IMEI : HIDDEN
MEID : HIDDEN
Serial NR. : XPH022040900XXXX
Firmware : ELE-L29 10.0.0.195(C431E22R2P5
IMEI1:HIDDEN
FB LockState: UNLOCKED
USER LockState: LOCKED
unlocked
Battery state: 0

================================================== =================

Check account status

User : cellenser
Credits left : 15

Activated features:
HCU time license
Software debugger

Unlock Huawei phone in fastboot mode (A00000B5EEF14A) cost 15 cr

================================================== =================

Factory reset protection Erase start

Fastboot command fail!

================================================== =================

If you read the code . You should be able to boot the phone to fastboot, and then in commandprompt use “fastboot oem unlock (your code)
enable OEM unlock and ADB Debug in settings first

[cellenser]

Yes you should be able to fastboot unlock now congrats !

perhaps you can assist me on how you got it working, describing the steps you took?

I just downloaded a Stock firmware from somewhere on the internet (not the ones you can download via Firmware Finder.
And it worked.


So, how do I proceed to unlock the bootloader permanently?
I've used DCPhoenix to activate testpoint and unlocked the bootloader temporarily.
After that, I tried to unlock it via fastboot flashing unlock (FAILED (remote: check password failed!)).

I also tried to unlock it via HCU and DC-Unlocker which didn't seem to work.

Is there a tutorial which steps I have to do to unlock the bootloader permanently on my device?

DC-Unlocker Log:

================================================== =================

DC - Unlocker 2 Client 1.00.1431

Detecting phone :

selection :
manufacturer - Huawei phones
model - Auto detect (recommended)

Found Phone : ELE-L29
Model : Huawei phone in fastboot mode
IMEI : HIDDEN
MEID : HIDDEN
Serial NR. : XPH022040900XXXX
Firmware : ELE-L29 10.0.0.195(C431E22R2P5
IMEI1:HIDDEN
FB LockState: UNLOCKED
USER LockState: LOCKED
unlocked
Battery state: 0

================================================== =================

Check account status

User : cellenser
Credits left : 15

Activated features:
HCU time license
Software debugger

Unlock Huawei phone in fastboot mode (A00000B5EEXXXX) cost 15 cr

================================================== =================

Factory reset protection Erase start

Fastboot command fail!

================================================== =================

HCU Log:

Read phone info
2021-01-29 10:53:13.561 Start read phone info from fastboot!
2021-01-29 10:53:13.573 Read phone info done!

Model: ELE-L29
MEID: A00000B5EEXXXX
pESN: 00000000
IMEI: HIDDEN
Firmware ver.: ELE-L29 10.0.0.195(C431E22R2P5)
SN: XPH022040900XXXX
Vendor: hw
Country: eea


2021-01-29 10:53:13.608 Phone info data backup saved to file X:\Oculus Quest\hcu\Backup\20210129_105313_86558404424XXXX.B AK


Memo log saved to X:\Oculus Quest\hcu\Logs\20210129_105313_HCU_ReadInfo_ A00000B5EEXXXX.txt

================================================== =================

Unlock Bootloader

2021-01-29 10:54:21.983 Autodetect COM port and phone type start!
2021-01-29 10:54:21.991 Compatible COM ports not found!

Phone not found !

Memo log saved to X:\Oculus Quest\hcu\Logs\20210129_105422_HCU_UnlockBoot_.txt

================================================== =================

Read Bootloader code

2021-01-29 10:54:42.453 Autodetect COM port and phone type start!
2021-01-29 10:54:42.462 Compatible COM ports not found!

Read bootloader code fail!
Phone not found !

Memo log saved to X:\Oculus Quest\hcu\Logs\20210129_105442_HCU_ReadBootCode_.t xt

[nieldk]

I'm finally able to get into testpoint-mode! Hype!
Is there a way to read the bootloader-code from my device and unlock the phone permanently that way?
Can I root my P30 this way?

Yes you should be able to fastboot unlock now congrats !

perhaps you can assist me on how you got it working, describing the steps you took?

[cellenser]

I'm finally able to get into testpoint-mode! Hype!
Is there a way to read the bootloader-code from my device and unlock the phone permanently that way?
Can I root my P30 this way?