Request Huawei phone FULL STOCK FIRMWARE HERE

[Valdemaras]

I need literally everything backup-able for Huawei p10 lite WAS-LX1C432 Europe

There is no such version of the phone as LX1, so whatever you are looking for you probbably won't find. X stands for any numbers like 0, 1, 2 etc. Files for was- with C432 cuwstomization already available on support area.

[robertg1983]

any BND-xxxx factory firmware needed

[Valdemaras]

any BND-xxxx factory firmware needed

File will be available next day only. This phone's board software is unusual, it's like random full stock rom, even has update data customization files along with it. We are not certain if it will help your phone, but we will upload it, file will be named Bond-AL10BC00B140_Board_Software_China_Nonspecific_Andr oid_7.0_EMUI_5.1_05014SDJ so you know what to look for.

[jacopo99]

Model: p8 lite 2017 Vodafone single sim PRA-LX1
Firmware ver.: PRA-LX1C02B139
region: europe/romania

[Valdemaras]

Model: p8 lite 2017 Vodafone single sim PRA-LX1
Firmware ver.: PRA-LX1C02B139
region: europe/romania

Sorry, but do not have this firmware version of this phone.

[jacopo99]

What can I do without the FW? I have the FRP&BOOTLOADER both locked. I managed to restore the various partitions but still I'm stucked with a soft brick and bootloop.

[Valdemaras]

What can I do without the FW? I have the FRP&BOOTLOADER both locked. I managed to restore the various partitions but still I'm stucked with a soft brick and bootloop.

You should flash your phone for now with board software only in advanced mode of dc-phoenix. If phone boots up it's good news. Initial boot after flashing it may take longer than usual. Then would need only to find full stock firmware that would fit your phone regardless it's original one or not, possibly from same region would do.

[jacopo99]

For the advance mode do I need to load a firmware or leaves all the boxes blank?

[Valdemaras]

For the advance mode do I need to load a firmware or leaves all the boxes blank?

You just need to select board software as mentioned.

[jacopo99]

What do you mean with " select board software"? Could you please send me a screenshot?

[Valdemaras]

What do you mean with " select board software"? Could you please send me a screenshot?

You download board software, you selected it on advanced tab and you flash, nothing different from standard tab when you also need to select files....

[jacopo99]

So I don't have to add the files?

[Valdemaras]

So I don't have to add the files?

I have no idea what are you talking here. All you have to do is to download board software from dc-phoenix support area, select it on software like i described 3 times and flash...

[jacopo99]

I have no idea what are you talking here. All you have to do is to download board software from dc-phoenix support area, select it on software like i described 3 times and flash...

I get an error (HCU already configured.)

Looking for a device in upgrade mode
COM10: Android Adapter PCUI (COM10)
COM11: DBAdapter Reserved Interface (COM11)

15/06/2018 21:44:18 Starting to write device in UPGRADE mode...
File to update: Prague-L11_C432B163_Firmware_Netherlands_Italy_Portugal_Nonspecific_Android7.0_EMUI5.0.APP
Validating file...
Looking for attached port...
Preparing to write...
Writing partition: SHA256RSA...OK
Writing partition: CRC...OK
Writing partition: CURVER...OK
Writing partition: VERLIST...OK
Writing partition: PACKAGE_TYPE...OK
Writing partition: EFI...OK
Writing partition: XLOADER...OK
Writing partition: FW_LPM3...OK
Writing partition: FASTBOOT...OK
Writing partition: MODEMNVM_UPDATE...OK
Writing partition: TEEOS...OK
Writing partition: TRUSTFIRMWARE...OK
Writing partition: SENSORHUB...OK
Writing partition: FW_HIFI...OK
Writing partition: BOOT...OK
Writing partition: RECOVERY...OK
Writing partition: RECOVERY2...OK
Writing partition: DTS...OK
Writing partition: MODEM_FW...OK
Writing partition: CACHE...OK
Writing partition: SYSTEM...OK
Writing partition: VENDOR...OK
Writing partition: PRODUCT...OK
Writing partition: USERDATA...
Writing partition: USERDATA...OK
Software written

15/06/2018 21:52:53 Starting to write device in UPGRADE mode...
File to update: PRA-L11_C432B163_update_data_customization_hw_eu.APP
Validating file...
Looking for attached port...
Preparing to write...
Writing partition: SHA256RSA...OK
Writing partition: CRC...OK
Writing partition: CURVER...OK
Writing partition: VERLIST...OK
Writing partition: PACKAGE_TYPE...OK
Writing partition: EFI...OK
Writing partition: CUST...OK
Writing partition: VERSION...OK
Writing partition: USERDATA...
Error downloading file PRA-L11_C432B163_update_data_customization_hw_eu_8.dtwork, partition: USERDATA
Error writing software
15/06/2018 21:55:56 Writing device finished with ERROR

[Chaserxx]

Hello Valdemaras,


Please, I need the board software for the P20 Pro "CLT" There are two available at easy-firmware.com.
And I also need the full factory firmware available there as well.

CLT-L29 It can be any Cust and any build. Prefer C432 or 636

Thank's for your time!

* I need recover to Huawei P20 Pro