DC-Phoenix

[Valdemaras]

"error writing bootloader", could not find a testpoint file for oreo
to all cracks out there. need advices and correct software for flashing my honor 8 pro with dc phoenix by method 3 testpoints. phone was on stock emui oreo before bricked. tried all testpoint files from the download section. tried once again every loadable testpoint file. no one is working. please help.

tried once again many different combinations of software. failed again. dear mr. valdemaras, purchased three times for a not working " solution". how can we solve this dilemma. would like to give this another chance.

What you need to do is to use update oeminfo tab and use loader + oeminfo. Otherwise only way to repair your phone is by replacing main board on it.

[maxie]

help with hcu-client.com site even i use vpn still i cant open this site

snap00595.png

[kurvenmeister]

dear mr. valdemaras

thank you for your advice. but it is a little bit too late. damaged my phone seriously an unrepairable.

[Valdemaras]

help with hcu-client.com site even i use vpn still i cant open this site

snap00595.png

Should be alright now.

[Ahsan Ali]

hy helow
my phone huawei Short x
with chinese board i debrand it
with ominfo update with ath-u01 and
giving error on logo partiion then i flash board firmware now phone stuck at logo with tricolour
some one help me to fix

[Valdemaras]

hy helow
my phone huawei Short x
with chinese board i debrand it
with ominfo update with ath-u01 and
giving error on logo partiion then i flash board firmware now phone stuck at logo with tricolour
some one help me to fix

After flashing loader + oemingo flash full stock rom not board software.

[Steve-1]

Download all files from get-file.org say File not found, pleas fix it

[mlm1102003]

hi
bootloader and oem info show error

oem info is not write able

and bootloader also show error


NOT a OEMINFO file
Invalid BOOTLOADER file format

http://uupload.ir/files/mpb3_capture.jpg

[Valdemaras]

Download all files from get-file.org say File not found, pleas fix it

Yes, at the moment files are not accessible sadly.
Should be available later this evening if all goes well.

[Valdemaras]

hi
bootloader and oem info show error

oem info is not write able

and bootloader also show error


NOT a OEMINFO file
Invalid BOOTLOADER file format


http://uupload.ir/files/mpb3_capture.jpg

This is related to your internet connection, files seem to not be able to download successfully.

[krzychunh]

#56 (permalink)

krzychunh Major Poster Join Date: Feb 2013 Posts: 44 Member: 1881160 Status: Offline Thanks Meter: 3

DISPLAY IS BLACK fastboot ok - lcd not crashed DC Phoenix 0.0.0.105 user:03EE4Bxxx Device detected: COM24: HUAWEI USB COM 1.0 (COM24) BOOTLOADER File to update: Kirin970_T2_A8.1_V5 2019-07-17 08:31:27 Starting to write device... Process identifier:16909653 Writing bootloader... Writing Kirin970_T2_A8.1_V5_3.dtwork... Writing Kirin970_T2_A8.1_V5_4.dtwork... Writing Kirin970_T2_A8.1_V5_5.dtwork... Waiting for fastboot device... Device found: FUH7N16523001477 Looking for a device in fastboot mode Device found: FUH7N1652xxxx77 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:FUH7N1xxxx477 IMEI:866218030143102 IMEI1:866218030143102 MEID:A000007FAB614F Build number: :BLA-L09 8.0.0.112(C652) Model: BLA-L09 Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Software written 2019-07-17 08:37:19 Writing device finished OK DC Phoenix 0.0.0.105 user:03EE4Bxxxx Looking for a device in upgrade mode No devices detected in upgrade mode Device found: FUH7N1652300xxxx Extracting recovery partition Extracting partition: ERECOVERY_KERNEL ERECOVERY_KERNEL partition extracted Extracting partition: ERECOVERY_RAMDISK ERECOVERY_RAMDISK partition extracted Extracting partition: ERECOVERY_VENDOR ERECOVERY_VENDOR partition extracted 2019-07-17 08:38:31 Starting to try Rescue Recovery... Looking for a device in fastboot mode Device found: FUH7N1652xxxxx Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:FUH7N165xxxx IMEI:86621803014xx IMEI1:86621803014xx MEID:A000007FAB61xx Build number: :BLA-L09 8.0.0.112(C652) Model: BLA-L09 Battery state: 0 OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Process identifier:16909867 Getting build number... Getting base version... Getting cust version... Getting preload version... Erasing ver .. . Writing rescue_recovery_kernel partition rescue_recovery_kernel partition UPDATE ...OK Writing rescue_recovery_ramdisk partition rescue_recovery_ramdisk partition UPDATE ...OK Writing rescue_recovery_vendor partition rescue_recovery_vendor partition UPDATE ...OK USB Device REMOVAL Type: @oem12.inf,%hwfastboot%;Android Sooner Single ADB Interface VidPid: VID_18D1&PID_D00D Instance id: FUH7N16523xxxx Looking for device in upgrade mode... Process was cancelled by user

[AM19x]

hi, i have a huawei p-smart FIG-LA1 , it was on bootloop ,
i didn't find any firmware from support area, then i tried to flash it with FIG-L11 firmware, but it always failed on flashing System image,
i've tried difrnt firmwares from support area but no success

here is log

"Figo-L11_8.0.0.128(C782)_Firmware_Android_8.0.0_EMUI_8. 0.0_05014YXQ.APP"

DC Phoenix 0.0.0.105
user:AM19x

Looking for a device in upgrade mode
No devices detected in upgrade mode
Device found: 35P4C18327000759


7/18/2019 1:33:15 PM Starting to write device in FASTBOOT mode...

Looking for a device in fastboot mode
Device found: 35P4C18327000759


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:35P4C18*********
IMEI:8658**********

IMEI1:000000000000000

MEID:00000000000000
Build number: :FIG-LX1 8.0.0.120(C652)
Model: FIG-LX1
Battery state: 3727mv
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked

Device with unsupported security patch

Process identifier:16941269


Extracting partition XLOADER...
Writing XLOADER partition
XLOADER partition UPDATE ...OK

Extracting partition FW_LPM3...
Writing FW_LPM3 partition
FW_LPM3 partition UPDATE ...OK

Extracting partition FASTBOOT...
Writing FASTBOOT partition
FASTBOOT partition UPDATE ...OK

Extracting partition MODEMNVM_UPDATE...
Writing MODEMNVM_UPDATE partition
MODEMNVM_UPDATE partition UPDATE ...OK

Extracting partition TEEOS...
Writing TEEOS partition
TEEOS partition UPDATE ...OK

Extracting partition TRUSTFIRMWARE...
Writing TRUSTFIRMWARE partition
TRUSTFIRMWARE partition UPDATE ...OK

Extracting partition SENSORHUB...
Writing SENSORHUB partition
SENSORHUB partition UPDATE ...OK

Extracting partition FW_HIFI...
Writing FW_HIFI partition
FW_HIFI partition UPDATE ...OK

Extracting partition KERNEL...
Writing KERNEL partition
KERNEL partition UPDATE ...OK

Extracting partition RAMDISK...
Writing RAMDISK partition
RAMDISK partition UPDATE ...OK

Extracting partition RECOVERY_RAMDISK...
Writing RECOVERY_RAMDISK partition
RECOVERY_RAMDISK partition UPDATE ...OK

Extracting partition RECOVERY_VENDOR...
Writing RECOVERY_VENDOR partition
RECOVERY_VENDOR partition UPDATE ...OK

Extracting partition ERECOVERY_KERNEL...
Writing ERECOVERY_KERNEL partition
ERECOVERY_KERNEL partition UPDATE ...OK

Extracting partition ERECOVERY_RAMDISK...
Writing ERECOVERY_RAMDISK partition
ERECOVERY_RAMDISK partition UPDATE ...OK

Extracting partition ERECOVERY_VENDOR...
Writing ERECOVERY_VENDOR partition
ERECOVERY_VENDOR partition UPDATE ...OK

Extracting partition RECOVERY_VBMETA...
Writing RECOVERY_VBMETA partition
RECOVERY_VBMETA partition UPDATE ...OK

Extracting partition ERECOVERY_VBMETA...
Writing ERECOVERY_VBMETA partition
ERECOVERY_VBMETA partition UPDATE ...OK

Extracting partition DTS...
Writing DTS partition
DTS partition UPDATE ...OK

Extracting partition MODEM_FW...
Writing MODEM_FW partition
MODEM_FW partition UPDATE ...OK

Extracting partition VBMETA...
Writing VBMETA partition
VBMETA partition UPDATE ...OK

Extracting partition ODM...
Writing ODM partition
ODM partition UPDATE ...OK

Extracting partition CACHE...
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition
CACHE partition UPDATE ...OK

Extracting partition SYSTEM...
Writing SYSTEM partition
sending sparse file 469928816 bytes
Waiting for answer...
send sparse file ERROR
SYSTEM partition UPDATE :FAIL sparse flash write failure

Device with unsupported security patch
7/18/2019 1:39:26 PM Writing device finished - INCOMPLETE

[AM19x]

this firmware is giving error in the end

"Figo-L11_8.0.0.129(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0_05014XUW.APP"

Quote:

DC Phoenix 0.0.0.105 user:AM19x Looking for a device in upgrade mode No devices detected in upgrade mode Device found: 35P4C18327000759 7/18/2019 10:59:34 AM Starting to write device in FASTBOOT mode... Looking for a device in fastboot mode Device found: 35P4C18327000759 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:35P4Cxxxxxxxxxxx IMEI:8658xxxxxxxxxxx IMEI1:000000000000000 MEID:00000000000000 Build number: :FIG-LX1 8.0.0.120(C652) Model: FIG-LX1 Battery state: 3547mv OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Device with unsupported security patch Process identifier:16938524 Extracting partition XLOADER... Writing XLOADER partition XLOADER partition UPDATE ...OK Extracting partition FW_LPM3... Writing FW_LPM3 partition FW_LPM3 partition UPDATE ...OK Extracting partition FASTBOOT... Writing FASTBOOT partition FASTBOOT partition UPDATE ...OK Extracting partition MODEMNVM_UPDATE... Writing MODEMNVM_UPDATE partition MODEMNVM_UPDATE partition UPDATE ...OK Extracting partition TEEOS... Writing TEEOS partition TEEOS partition UPDATE ...OK Extracting partition TRUSTFIRMWARE... Writing TRUSTFIRMWARE partition TRUSTFIRMWARE partition UPDATE ...OK Extracting partition SENSORHUB... Writing SENSORHUB partition SENSORHUB partition UPDATE ...OK Extracting partition FW_HIFI... Writing FW_HIFI partition FW_HIFI partition UPDATE ...OK Extracting partition KERNEL... Writing KERNEL partition KERNEL partition UPDATE ...OK Extracting partition RAMDISK... Writing RAMDISK partition RAMDISK partition UPDATE ...OK Extracting partition RECOVERY_RAMDISK... Writing RECOVERY_RAMDISK partition RECOVERY_RAMDISK partition UPDATE ...OK Extracting partition RECOVERY_VENDOR... Writing RECOVERY_VENDOR partition RECOVERY_VENDOR partition UPDATE ...OK Extracting partition ERECOVERY_KERNEL... Writing ERECOVERY_KERNEL partition ERECOVERY_KERNEL partition UPDATE ...OK Extracting partition ERECOVERY_RAMDISK... Writing ERECOVERY_RAMDISK partition ERECOVERY_RAMDISK partition UPDATE ...OK Extracting partition ERECOVERY_VENDOR... Writing ERECOVERY_VENDOR partition ERECOVERY_VENDOR partition UPDATE ...OK Extracting partition RECOVERY_VBMETA... Writing RECOVERY_VBMETA partition RECOVERY_VBMETA partition UPDATE ...OK Extracting partition ERECOVERY_VBMETA... Writing ERECOVERY_VBMETA partition ERECOVERY_VBMETA partition UPDATE ...OK Extracting partition DTS... Writing DTS partition DTS partition UPDATE ...OK Extracting partition MODEM_FW... Writing MODEM_FW partition MODEM_FW partition UPDATE ...OK Extracting partition VBMETA... Writing VBMETA partition VBMETA partition UPDATE ...OK Extracting partition ODM... Writing ODM partition ODM partition UPDATE ...OK Extracting partition CACHE... Erasing CACHE partition Partition CACHE erased Writing CACHE partition CACHE partition UPDATE ...OK Extracting partition SYSTEM... Writing SYSTEM partition sending sparse file 469920720 bytes Waiting for answer... send sparse file OK sending sparse file 469945692 bytes Waiting for answer... send sparse file OK sending sparse file 471099316 bytes Waiting for answer... send sparse file OK sending sparse file 470920348 bytes Waiting for answer... send sparse file OK sending sparse file 471616108 bytes Waiting for answer... send sparse file OK sending sparse file 298968312 bytes Waiting for answer... send sparse file OK SYSTEM partition UPDATE ...OK Extracting partition CUST... Erasing CUST partition Partition CUST erased Writing CUST partition CUST partition UPDATE ...OK Extracting partition VERSION... Writing VERSION partition VERSION partition UPDATE ...OK Extracting partition USERDATA... Erasing USERDATA partition Partition USERDATA erased Writing USERDATA partition USERDATA partition UPDATE ...OK Software written 7/18/2019 11:07:21 AM Writing device finished OK Waiting for fastboot device... USB Device REMOVAL Type: @oem37.inf,%hwfastboot%;Android Sooner Single ADB Interface VidPid: VID_18D1&PID_D00D Instance id: 35P4C18327000759 USB Device INSERTION Type: @oem37.inf,%hwfastboot%;Android Sooner Single ADB Interface VidPid: VID_18D1&PID_D00D Instance id: 35P4C18327000759 Device found: 35P4C18327000759 Writing rescue_recovery_kernel partition rescue_recovery_kernel partition UPDATE ...OK Exception: Cannot open file "". The filename, directory name, or volume label syntax is incorrect

[Vincentas]

this firmware is giving error in the end

"Figo-L11_8.0.0.129(C432)_Firmware_Android_8.0.0_EMUI_8. 0.0_05014XUW.APP"

Quote:

DC Phoenix 0.0.0.105 user:AM19x Looking for a device in upgrade mode No devices detected in upgrade mode Device found: 35P4C18327000759 7/18/2019 10:59:34 AM Starting to write device in FASTBOOT mode... Looking for a device in fastboot mode Device found: 35P4C18327000759 Getting IMEI... Getting build number... Getting model ... Getting battery state... Getting backdoor info... Getting lock state info... Getting lock boot info... SN:35P4Cxxxxxxxxxxx IMEI:8658xxxxxxxxxxx IMEI1:000000000000000 MEID:00000000000000 Build number: :FIG-LX1 8.0.0.120(C652) Model: FIG-LX1 Battery state: 3547mv OEM lock state info: FB LockState: UNLOCKED USER LockState: LOCKED OEM get bootinfo: unlocked Device with unsupported security patch Process identifier:16938524 Extracting partition XLOADER... Writing XLOADER partition XLOADER partition UPDATE ...OK Extracting partition FW_LPM3... Writing FW_LPM3 partition FW_LPM3 partition UPDATE ...OK Extracting partition FASTBOOT... Writing FASTBOOT partition FASTBOOT partition UPDATE ...OK Extracting partition MODEMNVM_UPDATE... Writing MODEMNVM_UPDATE partition MODEMNVM_UPDATE partition UPDATE ...OK Extracting partition TEEOS... Writing TEEOS partition TEEOS partition UPDATE ...OK Extracting partition TRUSTFIRMWARE... Writing TRUSTFIRMWARE partition TRUSTFIRMWARE partition UPDATE ...OK Extracting partition SENSORHUB... Writing SENSORHUB partition SENSORHUB partition UPDATE ...OK Extracting partition FW_HIFI... Writing FW_HIFI partition FW_HIFI partition UPDATE ...OK Extracting partition KERNEL... Writing KERNEL partition KERNEL partition UPDATE ...OK Extracting partition RAMDISK... Writing RAMDISK partition RAMDISK partition UPDATE ...OK Extracting partition RECOVERY_RAMDISK... Writing RECOVERY_RAMDISK partition RECOVERY_RAMDISK partition UPDATE ...OK Extracting partition RECOVERY_VENDOR... Writing RECOVERY_VENDOR partition RECOVERY_VENDOR partition UPDATE ...OK Extracting partition ERECOVERY_KERNEL... Writing ERECOVERY_KERNEL partition ERECOVERY_KERNEL partition UPDATE ...OK Extracting partition ERECOVERY_RAMDISK... Writing ERECOVERY_RAMDISK partition ERECOVERY_RAMDISK partition UPDATE ...OK Extracting partition ERECOVERY_VENDOR... Writing ERECOVERY_VENDOR partition ERECOVERY_VENDOR partition UPDATE ...OK Extracting partition RECOVERY_VBMETA... Writing RECOVERY_VBMETA partition RECOVERY_VBMETA partition UPDATE ...OK Extracting partition ERECOVERY_VBMETA... Writing ERECOVERY_VBMETA partition ERECOVERY_VBMETA partition UPDATE ...OK Extracting partition DTS... Writing DTS partition DTS partition UPDATE ...OK Extracting partition MODEM_FW... Writing MODEM_FW partition MODEM_FW partition UPDATE ...OK Extracting partition VBMETA... Writing VBMETA partition VBMETA partition UPDATE ...OK Extracting partition ODM... Writing ODM partition ODM partition UPDATE ...OK Extracting partition CACHE... Erasing CACHE partition Partition CACHE erased Writing CACHE partition CACHE partition UPDATE ...OK Extracting partition SYSTEM... Writing SYSTEM partition sending sparse file 469920720 bytes Waiting for answer... send sparse file OK sending sparse file 469945692 bytes Waiting for answer... send sparse file OK sending sparse file 471099316 bytes Waiting for answer... send sparse file OK sending sparse file 470920348 bytes Waiting for answer... send sparse file OK sending sparse file 471616108 bytes Waiting for answer... send sparse file OK sending sparse file 298968312 bytes Waiting for answer... send sparse file OK SYSTEM partition UPDATE ...OK Extracting partition CUST... Erasing CUST partition Partition CUST erased Writing CUST partition CUST partition UPDATE ...OK Extracting partition VERSION... Writing VERSION partition VERSION partition UPDATE ...OK Extracting partition USERDATA... Erasing USERDATA partition Partition USERDATA erased Writing USERDATA partition USERDATA partition UPDATE ...OK Software written 7/18/2019 11:07:21 AM Writing device finished OK Waiting for fastboot device... USB Device REMOVAL Type: @oem37.inf,%hwfastboot%;Android Sooner Single ADB Interface VidPid: VID_18D1&PID_D00D Instance id: 35P4C18327000759 USB Device INSERTION Type: @oem37.inf,%hwfastboot%;Android Sooner Single ADB Interface VidPid: VID_18D1&PID_D00D Instance id: 35P4C18327000759 Device found: 35P4C18327000759 Writing rescue_recovery_kernel partition rescue_recovery_kernel partition UPDATE ...OK Exception: Cannot open file "". The filename, directory name, or volume label syntax is incorrect

Looks like file toes not fit or it is not possible to flash your phone due unsupported security patch.

[AM19x]

Bro these firmwares were from DC Support , this is why i've written those file names too